Export limit exceeded: 11167 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11167 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-21892 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix the recovery flow of the UMR QP This patch addresses an issue in the recovery flow of the UMR QP, ensuring tasks do not get stuck, as highlighted by the call trace [1]. During recovery, before transitioning the QP to the RESET state, the software must wait for all outstanding WRs to complete. Failing to do so can cause the firmware to skip sending some flushed CQEs with errors and simply discard them upon the RESET, as per the IB specification. This race condition can result in lost CQEs and tasks becoming stuck. To resolve this, the patch sends a final WR which serves only as a barrier before moving the QP state to RESET. Once a CQE is received for that final WR, it guarantees that no outstanding WRs remain, making it safe to transition the QP to RESET and subsequently back to RTS, restoring proper functionality. Note: For the barrier WR, we simply reuse the failed and ready WR. Since the QP is in an error state, it will only receive IB_WC_WR_FLUSH_ERR. However, as it serves only as a barrier we don't care about its status. [1] INFO: task rdma_resource_l:1922 blocked for more than 120 seconds. Tainted: G W 6.12.0-rc7+ #1626 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:rdma_resource_l state:D stack:0 pid:1922 tgid:1922 ppid:1369 flags:0x00004004 Call Trace: <TASK> __schedule+0x420/0xd30 schedule+0x47/0x130 schedule_timeout+0x280/0x300 ? mark_held_locks+0x48/0x80 ? lockdep_hardirqs_on_prepare+0xe5/0x1a0 wait_for_completion+0x75/0x130 mlx5r_umr_post_send_wait+0x3c2/0x5b0 [mlx5_ib] ? __pfx_mlx5r_umr_done+0x10/0x10 [mlx5_ib] mlx5r_umr_revoke_mr+0x93/0xc0 [mlx5_ib] __mlx5_ib_dereg_mr+0x299/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? __lock_acquire+0x64e/0x2080 ? mark_held_locks+0x48/0x80 ? find_held_lock+0x2d/0xa0 ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? __fget_files+0xc3/0x1b0 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f99c918b17b RSP: 002b:00007ffc766d0468 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc766d0578 RCX: 00007f99c918b17b RDX: 00007ffc766d0560 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffc766d0540 R08: 00007f99c8f99010 R09: 000000000000bd7e R10: 00007f99c94c1c70 R11: 0000000000000246 R12: 00007ffc766d0530 R13: 000000000000001c R14: 0000000040246a80 R15: 0000000000000000 </TASK> | ||||
| CVE-2026-110923 | 2026-10-21 | 6.5 Medium | ||
| CVE-2026-110923 has been marked as a duplicate of CVE-2026-106552. | ||||
| CVE-2026-114040 | 1 Dt42 | 1 Berrynet | 2026-10-21 | 3.5 Low |
| A security vulnerability has been detected in DT42 BerryNet up to 3.10.2. The affected element is the function DLModelManager.get_model_meta of the file berrynet/dlmodelmgr.py of the component Model Package Metadata Handler. The manipulation of the argument label leads to path traversal. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-111170 | 2026-10-21 | 6.5 Medium | ||
| kedro-datasets from 9.3.0 through 9.6.0 contains a path traversal vulnerability in MatplotlibDataset.save() that allows attackers to write files outside the dataset directory by supplying absolute plot names. Because validate_sub_path() strips leading slashes while pathlib's join discards the base path, attackers can create or overwrite files anywhere the process can write. | ||||
| CVE-2026-113743 | 1 Tenstorrent | 1 Tt-metal | 2026-10-21 | 6.3 Medium |
| A weakness has been identified in Tenstorrent tt-metal up to 0.80.0. The affected element is the function load_hf_state_dict_filtered of the file models/tt_transformers/tt/load_checkpoints.py. This manipulation of the argument weight_map causes path traversal. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 0.81.0-dev20261016 is sufficient to fix this issue. Patch name: 4851ccf347f6903c3d819eed60705600386e52c3. It is suggested to upgrade the affected component. | ||||
| CVE-2026-114063 | 1 Svelte | 1 Kit | 2026-10-21 | 7.5 High |
| SvelteKit (@sveltejs/kit) from 2.10.0 before 3.0.0 contains a path traversal vulnerability in the vite preview server on Windows that allows unauthenticated attackers to read files outside the prerendered output directory. Attackers who can reach the preview server through network access or a tunnel can send crafted requests to expose source code, configuration, or credentials readable by the server process. | ||||
| CVE-2026-113738 | 1 R6410418 | 1 Jackrong-llm-finetuning-guide | 2026-10-21 | 6.3 Medium |
| A vulnerability has been found in R6410418 Jackrong-llm-finetuning-guide up to ef2b17f2798cd18cd85375080c35a58397ad0d09. This vulnerability affects the function extract_mtp_heads of the file qwen-mtp-gguf/scripts/qwen_mtp_gguf_pipeline.py of the component MTP weight_map Handler. The manipulation of the argument shard_name leads to path traversal. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-113737 | 1 R6410418 | 1 Jackrong-llm-finetuning-guide | 2026-10-21 | 5.5 Medium |
| A flaw has been found in R6410418 Jackrong-llm-finetuning-guide up to ef2b17f2798cd18cd85375080c35a58397ad0d09. This affects the function validate_indexed_tensors of the file qwen-mtp-gguf/scripts/qwen_mtp_gguf_pipeline.py. Executing a manipulation of the argument weight_map can lead to path traversal. The attack may be performed from remote. The exploit has been published and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-85409 | 1 Eleveo | 1 Quality Management | 2026-10-20 | 6.3 Medium |
| A vulnerability was identified in Eleveo Quality Management 9.7.0. The affected element is the function QuestionnaireService.runDataExportNow of the component Questionnaire Service. Such manipulation of the argument file_name leads to path traversal. The attack may be performed from remote. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-101142 | 1 Eleveo | 1 Quality Management | 2026-10-20 | 6.3 Medium |
| A vulnerability has been found in Eleveo Quality Management 9.7.0. Affected by this vulnerability is an unknown functionality of the file Scorecard.jsp of the component Questionnaire Audio Upload. The manipulation leads to path traversal. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-110095 | 1 Fast-uri | 1 Fast-uri | 2026-10-20 | 3.7 Low |
| fast-uri is a dependency-free RFC 3986 URI parser and serializer for Node.js. In versions before 2.4.8, from 3.0.0 through 3.1.8, and from 4.0.0 through 4.2.2, the normalize() and serialize() functions apply RFC 3986 dot-segment removal to the path of a relative-path reference, even though that algorithm is defined only for the merged target path during resolution, so a leading parent-directory segment can be dropped and a document-relative reference can become root-relative. An application that normalizes an attacker-supplied or user-supplied relative reference and then resolves it, or uses it as a cache, deduplication, or authorization key, can have the reference escape its intended directory and point at a different resource. The issue is fixed in fast-uri 2.4.8, 3.1.9, and 4.2.3, and users should upgrade to one of these versions or later. As a workaround, resolve a relative reference against its absolute base first and normalize the absolute result instead of normalizing the reference beforehand. | ||||
| CVE-2026-69943 | 1 Microsoft | 3 Sharepoint Server, Sharepoint Server 2016, Sharepoint Server 2019 | 2026-10-20 | 8.8 High |
| Improper limitation of a pathname to a restricted directory ('path traversal') in Microsoft Office SharePoint allows an authorized attacker to execute code over a network. | ||||
| CVE-2026-43852 | 1 Advantech | 1 Adam-3600 | 2026-10-20 | N/A |
| A vulnerability could allow an authenticated attacker to write files to arbitrary locations on the system. | ||||
| CVE-2026-113719 | 1 Pypa | 1 Virtualenv | 2026-10-20 | 4.5 Medium |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.14.9, PipInstall._uninstall_previous_version() accepts existing seed-package metadata and _uninstall_dist() joins entries from top_level.txt and RECORD to site-packages without checking containment. When a reused destination contains distribution metadata influenced by another account, relative traversal, absolute entries, or linked parents can cause app-data reseeding to delete files outside the environment or the environment root with the invoking user's permissions, provided that user has deletion rights over the named paths. The deletion occurs during environment creation before any later use of the environment. Fresh environments without existing package metadata and creation with --clear do not enter this cleanup path. This issue is fixed in version 21.14.9. | ||||
| CVE-2026-112248 | 1 Grandnode | 2 Grandnode, Grandnode2 | 2026-10-20 | 4.7 Medium |
| A security vulnerability has been detected in grandnode grandnode2 up to 2.3.0. This impacts the function ProductImportDataObject.PrepareProductPictures of the component Excel Import. The manipulation of the argument Picture1/Picture2/Picture3 leads to path traversal. The attack can be initiated remotely. Upgrading to version 2.4.0 will fix this issue. The identifier of the patch is 2abbaed232080ad74949c6f35581f0351e309972. It is suggested to upgrade the affected component. The vendor was contacted early about this disclosure. | ||||
| CVE-2016-20103 | 2026-10-20 | 7.5 High | ||
| Cherry Plugin for WordPress before 1.2.7 contains a path traversal vulnerability that allows unauthenticated attackers to download arbitrary files via the 'file' parameter. Attackers can send GET requests to /admin/import-export/download-content.php with traversal sequences like ../../../../../wp-config.php to read database credentials, since the script passes input directly to readfile(). Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-19. | ||||
| CVE-2016-20100 | 1 Memphis Documents Library Project | 1 Memphis Documents Library | 2026-10-20 | 7.5 High |
| Memphis Documents Library plugin for WordPress before 3.1.6 contains a path traversal vulnerability that allows unauthenticated attackers to read arbitrary files via the mdocs-img-preview parameter. Attackers can send GET requests with traversal sequences to mdocs_img_preview() in mdocs-downloads.php to download wp-config.php containing database credentials. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-22. | ||||
| CVE-2015-20125 | 2026-10-20 | 7.5 High | ||
| Aspose PDF Exporter plugin for WordPress before 2.0 contains a path traversal vulnerability that allows unauthenticated attackers to download files through the unsanitized 'file' parameter passed to readfile(). Attackers can send GET requests to aspose_pdf_exporter_download.php with traversal sequences like ../../../wp-config.php to retrieve WordPress database credentials. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-19. | ||||
| CVE-2015-20123 | 2026-10-20 | 7.5 High | ||
| Aspose Doc Exporter plugin for WordPress before 2.0 contains a path traversal vulnerability that allows unauthenticated attackers to download arbitrary files by passing unsanitized paths to readfile(). Attackers can send GET requests to aspose_doc_exporter_download.php with the 'file' parameter set to values like ../../../wp-config.php to retrieve database credentials. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-23. | ||||
| CVE-2014-125134 | 2026-10-20 | 7.5 High | ||
| ChurcHope theme for WordPress before 2.2 contains a path traversal vulnerability that allows unauthenticated attackers to download arbitrary files through the 'file' parameter of /wp-content/themes/churchope/lib/downloadlink.php. Attackers can supply directory traversal sequences to read sensitive files like wp-config.php or /etc/passwd, exposing database credentials. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-18. | ||||