| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| adm-zip before 0.6.1 contains an inconsistent entry resolution vulnerability that allows attackers to bypass content validation by supplying ZIP archives with duplicate entry names. Attackers can craft archives where getEntry() returns the last duplicate while extractAllTo() writes the first, causing unvalidated bytes to be written to disk. |
| Sentry-Javascript is an official Sentry SDKs for JavaScript. From 9.36.0 until 9.47.2, 10.75.2, and 11.0.0-rc.1, the webpack integration for @sentry/nextjs skips application middleware for every request path under a configured tunnelRoute, while the tunnel rewrite serves only the exact tunnel path with valid o and p query parameters. When an application route directly collides with the tunnel path or a root dynamic segment resolves under it, an unauthenticated request can reach that route without middleware authorization. Exploitation requires tunnelRoute, a webpack build, a colliding route, and middleware being the only authorization control. This issue is fixed in versions 9.47.2, 10.75.2, and 11.0.0-rc.1. |
| GitPython is a python library used to interact with Git repositories. Prior to 3.2.1, create_submodule() in git/objects/submodule/base.py accepts an attacker-influenced submodule path such as .git/hooks and invokes _clone_repo() before safely rejecting the destination. In 3.1.x, _validate_repo_path() does not exist and the call succeeds silently, while in 3.2.0 and later affected revisions the check in git/index/base.py raises ValueError only after the clone has written to disk and does not remove the planted file. An attacker-controlled submodule can therefore place an executable post-checkout hook that a later Git operation executes. Exploitation requires an application to accept an untrusted submodule path and a clone destination such as .git/hooks that is empty enough for Git to clone into it, which commonly means that default sample hooks are absent. This issue is fixed in version 3.2.1. |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76528 are related to protection mechanism failure and are grouped under the Common Weakness Enumeration (CWE) CWE-693. |
| vLLM before 0.31.0 uses a client-supplied multimodal uuid verbatim as cache identity with no consistency check on cache hits, allowing engine crashes. Unauthenticated attackers can desynchronize the P0/P1 processor caches to trigger a fatal token-placeholder mismatch, killing the entire serving instance until restarted. |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76301 are related to protection mechanism failure and are grouped under the Common Weakness Enumeration (CWE) CWE-693. |
| A NULL pointer dereference in the dasher_insert_timeline_entry function (/filters/dasher.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| OGNL is an Object Graph Navigation Library for Java. Prior to 3.4.13, the optional stricter-invocation mode in OgnlRuntime.invokeMethod checks the declaring class of the method that OGNL invokes but does not block java.lang.reflect.Method, java.lang.reflect.Constructor, or java.lang.reflect.Field. An attacker-controlled expression can invoke one of these reflection objects as a proxy for a method on a blocked class, causing the real operation to execute inside JDK reflection without passing through the stricter-invocation check again. Exploitation requires an application to evaluate untrusted OGNL expressions, use the default or an equivalently permissive MemberAccess that permits reflection, and rely on stricter invocation as a sandbox. Applications using a restrictive MemberAccess, including Apache Struts with SecurityMemberAccess, are not affected by this bypass. This issue is fixed in 3.4.13. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix clone_alias() to use the original device's devid
Currently clone_alias() assumes first argument (pdev) is always the
original device pointer. This function is called by
pci_for_each_dma_alias() which based on topology decides to send
original or alias device details in first argument.
This meant that the source devid used to look up and copy the DTE
may be incorrect, leading to wrong or stale DTE entries being
propagated to alias device.
Fix this by passing the original pdev as the opaque data argument to
both the direct clone_alias() call and pci_for_each_dma_alias(). Inside
clone_alias(), retrieve the original device from data and compute devid
from it. |
| filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, SoftFileLock versions from 4.1.0 can reuse a stale observation when an attacker pre-dates and removes its own marker, at least two lock-user processes are waiting, coarse or matching modification times preserve the observation, and an honest contender creates a fresh marker on the reused inode, causing that live marker to be removed as stale. This issue is fixed in version 4.2.1. |
| Execution After Redirect (EAR) vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61, 9.0.123, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ip_gre: Reject enabling collect metadata through changelink
ipgre_netlink_parms() can enable collect_md on an existing GRE, GRETAP
or ERSPAN device. Unlike newlink, changelink does not enforce metadata
tunnel uniqueness. Converting a non-metadata device can therefore
replace the metadata receive entry for another device of the same type
in the same netns. Deleting either device then clears the shared entry,
breaking metadata receive lookup for the surviving device.
If parameter validation fails after collect_md is set, deleting the
modified device can also clear an entry it never owned.
Reject enabling metadata mode in both changelink callbacks before any
encapsulation or tunnel parameters are modified. Allow requests that
repeat the metadata attribute on an existing metadata device. |
| Bandisoft Bandizip before 7.47 fails to propagate Mark-of-the-Web to extracted .ps1 and .psm1 files, allowing attackers to bypass zone-based execution protections. Attackers can deliver unsigned PowerShell scripts or modules in downloaded archives that run under the RemoteSigned policy when the user invokes them. |
| A vulnerability has been found in Dolibarr up to 23.0.2. The impacted element is an unknown function of the file htdocs/document.php of the component CSP. Such manipulation leads to protection mechanism failure. The attack can be executed remotely. Upgrading to version 24.0.0 is sufficient to resolve this issue. The name of the patch is 9f9ffa288d4ad2632c1d5dd88272c699a592f4ec. You should upgrade the affected component. |
| The issue was addressed with additional app bundle integrity checks. This issue is fixed in macOS Golden Gate 27. A maliciously modified app may not be prevented from launching. |
| A flaw was found in Quarkus. This issue occurs when receiving a request over websocket with no role-based permission specified on the GraphQL operation, Quarkus processes the request without authentication despite the endpoint being secured. This can allow an attacker to access information and functionality outside of normal granted API permissions. |
| Renovate before 44.61.3 contains a protection mechanism bypass vulnerability that allows minimumReleaseAge checks to be skipped when a user requests a PR rebase via the rebase/retry checkbox. Attackers who publish a malicious dependency version can have it pushed into the PR and run in CI before the required release age elapses. |
| A security flaw has been discovered in OpenClaw ClawScan up to 0.1.6. This impacts the function shouldSkipTargetPath of the file internal/runner/runner.go of the component Static Scanner. Performing a manipulation results in protection mechanism failure. Attacking locally is a requirement. The exploit has been released to the public and may be used for attacks. Upgrading to version 0.1.7 will fix this issue. The patch is named 9f6a6fbb9f1137345566d0ab44c73893dfe112fa. The affected component should be upgraded. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: fix manual hash table handle IDR aliasing
A u32 hash table created with an explicit handle ('tc filter add ...
handle 801: u32 divisor N') keys its IDR entry on the raw handle, while
the destroy paths free it under handle2id(handle). The two key domains
disagree for handles in the 0x800..0xFFF htid range:
handle2id() folds them back into the auto-allocated id space (1..0x7FF).
A manual table therefore leaves its raw-keyed IDR entry unreachable on
delete (a permanent leak), and its delete can drop the idr entry of an
unrelated live auto table. A later auto allocation can then hand out a
handle that aliases the live manual table; u32_lookup_ht() first-match
routes lookups and TCA_U32_LINK for that htid to the wrong table.
Key the divisor-path alloc on handle2id(handle) so allocation and
removal share one key domain. A manual handle that maps onto an id
already in use is rejected with -ENOSPC, and auto allocation skips ids
held by live manual tables.
Conditions to recreate:
ip link add test0 type dummy
tc qdisc add dev test0 clsact
tc filter add dev test0 ingress protocol ip pref 1 \
handle 801: u32 divisor 16
tc filter add dev test0 ingress protocol ip pref 2 u32 divisor 16
tc -d filter show dev test0 ingress | grep 'fh 801:'
# unpatched: two live tables with handle 0x80100000 (the pref 2 root
# hnode is auto-allocated id 1); patched: the auto hnode takes id 2.
Also tested with a poc with a live u32 table on the block, add/delete a manual
table 'handle 901: u32 divisor 1' twice; unpatched, the re-add fails with
-ENOSPC because the raw key leaked on the first delete. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
l2cap_ecred_reconf_rsp() returns early on success without clearing
chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,
l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a
successful transaction to prevent the channel from matching subsequent
responses with the recycled ident value.
A remote attacker that completed a reconfiguration as the peer can
replay a failure response with the stale ident, causing the kernel to
match and destroy the already-established channel via
l2cap_chan_del(chan, ECONNRESET).
Clear chan->ident for all matching channels on success, and harden the
failure path by using l2cap_chan_hold_unless_zero() consistent with
other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident). |
