| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76497 are related to issues concerning insecure temporary files that are grouped under the Common Weakness Enumeration (CWE) Base CWE-377. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core-qspi: control built-in cs manually
The coreQSPI IP supports only a single chip select, which is
automagically operated by the hardware - set low when the transmit
buffer first gets written to and set high when the number of bytes
written to the TOTALBYTES field of the FRAMES register have been sent on
the bus. Additional devices must use GPIOs for their chip selects.
It was reported to me that if there are two devices attached to this
QSPI controller that the in-built chip select is set low while linux
tries to access the device attached to the GPIO.
This went undetected as the boards that connected multiple devices to
the SPI controller all exclusively used GPIOs for chip selects, not
relying on the built-in chip select at all. It turns out that this was
because the built-in chip select, when controlled automagically, is set
low when active and high when inactive, thereby ruling out its use for
active-high devices or devices that need to transmit with the chip
select disabled.
Modify the driver so that it controls chip select directly, retaining
the behaviour for mem_ops of setting the chip select active for the
entire duration of the transfer in the exec_op callback. For regular
transfers, implement the set_cs callback for the core to use.
As part of this, the existing setup callback, mchp_coreqspi_setup_op(),
is removed. Modifying the CLKIDLE field is not safe to do during
operation when there are multiple devices, so this code is removed
entirely. Setting the MASTER and ENABLE fields is something that can be
done once at probe, it doesn't need to be re-run for each device.
Instead the new setup callback sets the built-in chip select to its
inactive state for active-low devices, as the reset value of the chip
select in software controlled mode is low. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Add missing save/restore handling of LBR MSRs
MSR_IA32_DEBUGCTLMSR and LBR MSRs are currently not enumerated by
KVM_GET_MSR_INDEX_LIST, and LBR MSRs cannot be set with KVM_SET_MSRS. So
save/restore is completely broken.
Fix it by adding the MSRs to msrs_to_save_base, and allowing writes to
LBR MSRs from userspace only (as they are read-only MSRs) if LBR
virtualization is enabled. Additionally, to correctly restore L1's LBRs
while L2 is running, make sure the LBRs are copied from the captured
VMCB01 save area in svm_copy_vmrun_state().
Note, for VMX, this also fixes a flaw where MSR_IA32_DEBUGCTLMSR isn't
reported as an MSR to save/restore.
Note #2, over-reporting MSR_IA32_LASTxxx on Intel is ok, as KVM already
handles unsupported reads and writes thanks to commit b5e2fec0ebc3 ("KVM:
Ignore DEBUGCTL MSRs with no effect") (kvm_do_msr_access() will morph the
unsupported userspace write into a nop).
[sean: guard with lbrv checks, massage changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue
The logic used to abort the DMA ring contains several flaws:
1. The driver unconditionally issues a ring abort even when the ring has
already stopped.
2. The completion used to wait for abort completion is never
re-initialized, resulting in incorrect wait behavior.
3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which
resets hardware ring pointers and disrupts the controller state.
4. If the ring is already stopped, the abort operation should be
considered successful without attempting further action.
Fix the abort handling by checking whether the ring is running before
issuing an abort, re-initializing the completion when needed, ensuring that
RING_CTRL_ENABLE remains asserted during abort, and treating an already
stopped ring as a successful condition. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix incorrect pruning due to atomic fetch precision tracking
When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC
and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as
a destination, thus receiving the old value from the memory location.
The current backtracking logic does not account for this. It treats
atomic fetch operations the same as regular stores where the src
register is only an input. This leads the backtrack_insn to fail to
propagate precision to the stack location, which is then not marked
as precise!
Later, the verifier's path pruning can incorrectly consider two states
equivalent when they differ in terms of stack state. Meaning, two
branches can be treated as equivalent and thus get pruned when they
should not be seen as such.
Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to
also cover atomic fetch operations via is_atomic_fetch_insn() helper.
When the fetch dst register is being tracked for precision, clear it,
and propagate precision over to the stack slot. For non-stack memory,
the precision walk stops at the atomic instruction, same as regular
BPF_LDX. This covers all fetch variants.
Before:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
After:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0
mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1
mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit |
| In the Linux kernel, the following vulnerability has been resolved:
sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting
Running stress-ng --schedpolicy 0 on an RT kernel on a big machine
might lead to the following WARNINGs (edited).
sched: DL de-boosted task PID 22725: REPLENISH flag missing
WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8
... (running_bw underflow)
Call trace:
dequeue_task_dl+0x15c/0x1f8 (P)
dequeue_task+0x80/0x168
deactivate_task+0x24/0x50
push_dl_task+0x264/0x2e0
dl_task_timer+0x1b0/0x228
__hrtimer_run_queues+0x188/0x378
hrtimer_interrupt+0xfc/0x260
...
The problem is that when a SCHED_DEADLINE task (lock holder) is
changed to a lower priority class via sched_setscheduler(), it may
fail to properly inherit the parameters of potential DEADLINE donors
if it didn't already inherit them in the past (shorter deadline than
donor's at that time). This might lead to bandwidth accounting
corruption, as enqueue_task_dl() won't recognize the lock holder as
boosted.
The scenario occurs when:
1. A DEADLINE task (donor) blocks on a PI mutex held by another
DEADLINE task (holder), but the holder doesn't inherit parameters
(e.g., it already has a shorter deadline)
2. sched_setscheduler() changes the holder from DEADLINE to a lower
class while still holding the mutex
3. The holder should now inherit DEADLINE parameters from the donor
and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen
Fix the issue by introducing __setscheduler_dl_pi(), which detects when
a DEADLINE (proper or boosted) task gets setscheduled to a lower
priority class. In case, the function makes the task inherit DEADLINE
parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to
ensure proper bandwidth accounting during the next enqueue operation. |
| virtualenv is a tool for creating isolated virtual python environments. From 21.14.8 until 21.14.10, the app-data seeder can leave an environment linked to temporary package files that virtualenv deletes when creation finishes. The environment-variable and configuration-file forms of symlink_app_data can enable this state even though the command-line flag is disabled for temporary app-data. The resulting environment depends on a cache pathname that its owner no longer controls. This issue is fixed in version 21.14.10. |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. Prior to 2.4.20, copy_model() in scheduler/ipp.c creates a predictable TempDir/<connection-number>.ppd path in an lp-group-writable directory and opens it as root without O_EXCL or O_NOFOLLOW. Exploitation requires an lp-group process able to write that directory to predict the connection-derived name and plant a symlink before the root open, while a privileged add-printer or modify-printer operation using a model PPD triggers copy_model(). The reporter treats an existing lp foothold and the privileged operation as distinct prerequisites, while the maintainer assesses high privileges because installing the relevant filter or administering the printer requires root or print-administrator access. If the race succeeds, the root scheduler follows the symlink and truncates or overwrites a root-writable target with generated PPD data, compromising file integrity or availability. This issue is fixed in version 2.4.20. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: do WoW offloads only on primary link
In case of multi-link connection, WCN7850 firmware crashes due to WoW
offloads enabled on both primary and secondary links.
Change to do it only on primary link to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: add pgmap check to biovec_phys_mergeable
biovec_phys_mergeable() is used by the request merge, DMA mapping,
and integrity merge paths to decide if two physically contiguous
bvec segments can be coalesced into one. It currently has no check
for whether the segments belong to different dev_pagemaps.
When zone device memory is registered in multiple chunks, each chunk
gets its own dev_pagemap. A single bio can legitimately contain
bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at
pgmap boundaries but the outer loop in bio_iov_iter_get_pages()
continues filling the same bio. If such bvecs are physically
contiguous, biovec_phys_mergeable() will coalesce them, making it
impossible to recover the correct pgmap for the merged segment
via page_pgmap().
Add a zone_device_pages_have_same_pgmap() check to prevent merging
bvec segments that span different pgmaps. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix re-decryption of RESPONSE packets
If a RESPONSE packet gets a temporary failure during processing, it may end
up in a partially decrypted state - and then get requeued for a retry.
Fix this by just discarding the packet; we will send another CHALLENGE
packet and thereby elicit a further response. Similarly, discard an
incoming CHALLENGE packet if we get an error whilst generating a RESPONSE;
the server will send another CHALLENGE. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Properly mark live registers for indirect jumps
For a `gotox rX` instruction the rX register should be marked as used
in the compute_insn_live_regs() function. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation
Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix regsafe() for pointers to packet
In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N
regsafe() may return true which may lead to current state with
valid packet range not being explored. Fix the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: only handle RESPONSE during service challenge
Only process RESPONSE packets while the service connection is still in
RXRPC_CONN_SERVICE_CHALLENGING. Check that state under state_lock before
running response verification and security initialization, then use a local
secured flag to decide whether to queue the secured-connection work after
the state transition. This keeps duplicate or late RESPONSE packets from
re-running the setup path and removes the unlocked post-transition state
test. |
| Elio through 1.13.0 contains an insecure temporary file vulnerability that allows local users to overwrite another user's files by pre-creating symbolic links at predictable capture paths. Attackers who know the victim's Elio process ID can plant a symlink so previewing media, fonts or archives truncates and overwrites victim-owned files. |
| Insecure Temporary File vulnerability in Hitachi Disk Array Driver for AIX and Hitachi Disk Array Driver for Virtual I/O Server.
This issue affects Hitachi Disk Array Driver for AIX: from 01-00 before 01-23-/A; Hitachi Disk Array Driver for Virtual I/O Server: from 01-04 before 01-23-/A. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure
If register_netdev() fails for one of the MTK_MAX_DEVS devices in
mtk_probe(), the error path jumps to err_deinit_ppe, skipping
mtk_unreg_dev(). The previously registered net_devices are then freed by
mtk_free_dev() while still in NETREG_REGISTERED state, hitting the
BUG_ON(dev->reg_state != NETREG_UNREGISTERED).
Route the register_netdev() failure to err_unreg_netdev so the net_devices
registered so far are properly unregistered before being freed. |
| The AsyncHttpClient library allows Java applications to execute HTTP requests and asynchronously process HTTP responses. From 2.0.0 until 2.16.1 and 3.0.12, PropertiesBasedResumableProcessor stores resumable download state at the predictable shared path $java.io.tmpdir/ahc/ResumableAsyncHandler.properties with default permissions and link-following file operations. A local user who can read the shared store can see download URLs, including embedded user information or query tokens. A local user who can write within or pre-create the affected shared store directory can plant a symbolic link that the client follows when saving state, truncating and overwriting a target file writable by the client process. The filesystem path is used when ResumableAsyncHandler decorates another AsyncHandler, while the no-argument constructors use a no-op processor and are unaffected. This issue is fixed in versions 2.16.1 and 3.0.12. |
