| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL packet to complete the QoS 2 handshake. This map has no size limit; the maxInflightQueue option is enforced only on the outbound publish path and does not constrain inbound message retention.
A malicious or compromised MQTT broker can exploit this by sending QoS 2 PUBLISH messages with distinct packet identifiers and withholding the PUBREL responses. Each incomplete handshake causes the client to retain the full publish message (topic, payload, and metadata) indefinitely, leading to unbounded memory growth in the Vert.x process. This can degrade the MQTT-consuming application or cause out-of-memory termination.
The impacted component is io.vertx:vertx-mqtt. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the PostgreSQL message decoder reads the 4-byte message length field from the PostgreSQL wire protocol without any maximum validation. A malicious, compromised, or man-in-the-middle PostgreSQL server can send a message header with the length field set to an extremely large value (up to Integer.MAX_VALUE), causing the decoder to accumulate subsequent TCP data into a composite buffer without bound, leading to unbounded memory allocation on the client and an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-pg-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle MySQL server can send a continuous stream of packets with the maximum payload length (0xFFFFFF), preventing the end-of-message condition from being reached, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-mysql-client. |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. |
| StreamReadConstraints.maxNameLength (default 50,000 characters) is intended to bound how much memory a single JSON Object property name can consume while being parsed, independently of the much larger maxStringLength (default 100,000,000 characters) that bounds ordinary string values. For parsers built over character input — Reader, String or char[] sources, all served by ReaderBasedJsonParser — that bound is not applied while the name is being accumulated. The code path instead re-uses the string-value length check, which is roughly 2000x larger by default.
In the character-input slow path, ReaderBasedJsonParser._parseName2() accumulates the name into the TextBuffer and, when a segment fills, calls TextBuffer.finishCurrentSegment(), which validates only maxStringLength. The correct check, StreamReadConstraints.validateNameLength(int), is reached afterwards in CharsToNameCanonicalizer.findSymbol(), once the entire name has been scanned to its closing quote. By that point the full name — up to maxStringLength characters — has already been buffered in memory.
A remote attacker who can have a single sufficiently long JSON Object property name parsed through this path can force allocation on the order of 100,000,000 characters (approximately 200 MB, with segment bookkeeping pushing real peak usage higher) before any StreamConstraintsException is thrown, instead of the approximately 50,000-character (about 100 KB) bound the API promises. Repeating this across concurrent requests can exhaust the heap and crash the process. No authentication or user interaction is required. Because StreamReadConstraints.maxDocumentLength is disabled by default (-1), nothing else bounds the token first, so the issue is exploitable under default configuration.
Byte-input parsers are not affected: UTF8StreamJsonParser, UTF8DataInputJsonParser and the non-blocking (async) parsers re-validate maxNameLength on every growth of the name-decode buffer via ParserBase._growNameDecodeBuffer(), rejecting an oversized name after allocating only tens of kilobytes. Applications are exposed when untrusted JSON is parsed from a String, Reader or char[] — for example an HTTP request body already read into a String — rather than from raw UTF-8 bytes.
This issue affects com.fasterxml.jackson.core:jackson-core from 2.16.0 and tools.jackson.core:jackson-core from 3.0.0. Releases before 2.16.0 are not affected, because StreamReadConstraints.maxNameLength was first introduced in jackson-core 2.16.0. |
| Allocation of resources without limits in the parsing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to cause a denial of service by delivering crafted input that triggers excessive resource consumption during the driver's parsing operations.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| IBM MQ 9.4.5.0 through 9.4.5.1 could allow an authenticated user to cause a denial of service by sending a specially crafted message that crashes consuming applications. |
| Pillow is a Python imaging library. From 5.4.0 until 13.0.0, Pillow performs quadratic copying while parsing GIF comments. GifImageFile._seek() repeatedly appends immutable bytes for comment sub-blocks and multiple comment extensions, and frame zero is parsed during Image.open(). An attacker can submit a small-dimension GIF containing many comment extensions to any application that opens the file. This can consume excessive CPU and deny service before the application can inspect the image. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. From 2.0.0 until 3.14.4, multipart request processing can retain an unbounded number of open file descriptors. An unauthenticated attacker can consequently exhaust file descriptors with specially crafted multipart requests when a handler uses Request.post(). This issue is fixed in version 3.14.4. |
| A malicious, compromised, or MITM-controlled Exchange server can return a single well-formed SOAP response containing an element with enough attributes to keep Thunderbird's main thread CPU-bound for seconds to hours. This vulnerability was fixed in Thunderbird 158 and Thunderbird 153.5. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow takes quadratic time to reserve PDF object identifiers when saving many frames with save_all enabled. PdfParser.next_object_id() repeatedly rebuilds and scans all previously reserved identifiers for every object. An attacker can supply a multi-frame image, including a small APNG with a large declared frame count, to an application that converts it to a multipage PDF. This can consume excessive CPU and deny service. This issue is fixed in version 13.0.0. |
| Grav API plugin (grav-plugin-api) 1.0.40 before 1.0.42 caches a full translation dictionary for every well-formed language code sent to the unauthenticated GET /api/v1/translations/{lang} endpoint, and 1.0.16 before 1.0.42 fails to check target and destination page rules in the sync and batch copy endpoints. Unauthenticated attackers can send small requests that each store about 560 KB to exhaust disk or APCu, while accounts with api.pages.write can overwrite translations or create pages that page-level rules deny. |
| Pillow is a Python imaging library. From 9.2.0 until 13.0.0, Pillow can retain a rejected GIF frame size after a decompression-bomb exception. In GifImageFile._seek, a crafted GIF can leave rejected dimensions stored after Image.DecompressionBombError; if an application catches that exception and continues processing the same image object, later seek or load operations allocate according to those dimensions and can exhaust memory, denying service. This issue is fixed in version 13.0.0. |
| IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 IBM Diamondback Tape Library and IBM Storage TS4500 Library could allow an authenticated user to cause a denial of service using specially crafted SMTP requests that would consume excessive amounts of system resources. |
| A flaw was found in Undertow. A remote attacker could exploit this vulnerability by sending specially crafted WebSocket messages with permessage-deflate negotiated. This could lead to excessive memory consumption due to the PerMessageDeflateFunction.largerBuffer() method using exponential doubling, resulting in a Denial of Service (DoS) for the affected application. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the stream protocol stored the FrameMax value negotiated during the Tune handshake but did not compare it with an inbound frame's declared length before buffering the frame. With the stream plugin enabled, a remote client could therefore cause excessive memory pressure and denial of service by declaring an oversized frame. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the Web STOMP WebSocket handler enforced neither max_frame_size nor login_timeout before authentication, allowing an unauthenticated client to keep a connection alive with a slow stream of small frames and accumulate unbounded pre-authentication state. The rabbitmq_web_stomp plugin must be enabled, and no authentication is required to reach the vulnerable path. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: restore combined single-frag length gate
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, Max-Age processing can overflow and skip closing a connection. An attacker can consequently exhaust the connection pool temporarily until garbage collection resolves the connections. This issue is fixed in version 3.14.4. |
