| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When the PCM sample array needs to grow, the RACK stack doubles a 16-bit allocation counter. Repeated doublings caused the counter to wrap to zero, resulting in a near-zero-length allocation followed by a copy of the existing samples into the undersized buffer. A remote peer can trigger the expansion by sending a sufficient number of ACKs on an established connection.
A remote attacker who can establish a TCP connection to a system using the RACK stack can trigger an out-of-bounds write of approximately 512 KB in the kernel heap possibly resulting in a kernel panic. |
| Pillow is a Python imaging library. From 2.0.0 until 13.0.0, Pillow has a heap buffer overflow and stale-heap disclosure in _tiffWriteProc when saving compressed TIFF data through libtiff to a target without a usable fileno(), such as BytesIO. The callback sizes its allocation from the prior buffer size instead of the current write position, allowing an attacker-controlled out-of-line TIFF tag or retained ICC profile to be copied beyond the allocation after libtiff seeks forward. This overflow can crash the process and may allow code execution. Independently, unwritten alignment gaps in compressed TIFF output larger than 64 KiB can disclose stale heap bytes without a crafted tag. File paths and targets with real file descriptors are unaffected. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 8.2.0 until 13.0.0, Pillow's tiled-TIFF decoder can read past the tile buffer while copying four-byte pixels. In _decodeTile, libtiff can return a tile allocation smaller than the required row stride multiplied by the tile length, and Pillow's stride-and-copy loop walks beyond that allocation. An attacker can supply a crafted tiled TIFF to an application that loads it. This can expose adjacent heap data in pixels or crash the process. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's FlashPix JPEG-tile decoder can write decoded scanlines beyond the allocated tile buffer. FlashPix (FPX) JPEG decoding selects raw mode LA with two bytes per pixel, while an unrecognized JPEG mode can be decoded as JCS_UNKNOWN with four components, causing ImagingJpegDecode to write four-component scanlines into the two-byte tile buffer. An attacker can supply a crafted OLE2 FlashPix file to an application with the optional olefile dependency installed that opens or thumbnails untrusted input. This can corrupt heap memory and may allow arbitrary code execution. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, Pillow's JPEG decoder can write a full-width scanline into a buffer sized for a requested draft scale. ImagingJpegDecode does not verify libjpeg's actual output width and component count after scaling is requested, and an 8-bit lossless SOF3 JPEG decoded by a build linked to libjpeg-turbo 3.x can ignore the requested downscaling geometry. An attacker can supply such a JPEG to an application that uses draft() or thumbnail() to request downscaling. This can corrupt heap memory, crash the process, or potentially allow code execution. Older libjpeg-turbo 2.x and IJG builds reject the SOF3 input. This issue is fixed in version 13.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink
vti_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In NTFS-3G before 2026.7.7, a heap buffer overflow exists in cat() in ntfscat.c that allows an attacker to corrupt heap memory in the ntfscat binary by crafting a malicious NTFS image. The overflow is triggered by reading a file. |
| A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C100/C101 v5, C210 v3.6 and C520WS v2.6 in the HTTP POST body parsing logic due to missing validation of remaining buffer capacity after dynamic allocation, due to insufficient boundary validation when handling externally supplied HTTP input.
An attacker
on the same network segment could trigger heap memory corruption conditions by
sending crafted payloads that cause write operations beyond allocated buffer
boundaries. Successful exploitation
causes a Denial-of-Service (DoS) condition, causing the device’s process to
crash or become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Check length in pkey_pckmo handler implementation
Explicitly check the length of the target buffer in the pkey_pckmo
implementation of the key_to_protkey() handler function. The handler
function fails, if the generated output data exceeds the length of the
provided target buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix len check in receive_big()
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Numeric truncation error in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend
Existing advertising instances can already hold the maximum extended
advertising payload. When hci_adv_bcast_annoucement() prepends the
Broadcast Announcement service data to that payload, the combined data
may no longer fit in the temporary buffer used to rebuild the
advertising data.
Reject that case before copying the existing payload and report the
failure through the device log. This keeps the existing advertising
data intact and avoids overrunning the temporary buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA: During rereg_mr ensure that REREG_ACCESS is compatible
If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be
re-evaluated to ensure it is properly pinned as RW. Since the umem is
hidden inside each driver's mr struct add a ib_umem_check_rereg() function
that each driver has to call before processing IB_MR_REREG_ACCESS.
mlx4 has to retain its duplicate ib_access_writable check because it
implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items
in place sequentially while the MR is live, so it will continue to not
support this combination. |
| In the Linux kernel, the following vulnerability has been resolved:
pstore/ram: fix buffer overflow in persistent_ram_save_old()
persistent_ram_save_old() can be called multiple times for the same
persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz
for PSTORE_TYPE_DMESG records).
Currently, the function only allocates prz->old_log when it is NULL,
but it unconditionally updates prz->old_log_size to the current buffer
size and then performs memcpy_fromio() using this new size. If the
buffer size has grown since the first allocation (which can happen
across different kernel boot cycles), this leads to:
1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls
2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer
using the incorrect (larger) old_log_size
The KASAN splat would look similar to:
BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x...
Read of size N at addr ... by task ...
The conditions are likely extremely hard to hit:
0. Crash with a ramoops write of less-than-record-max-size bytes.
1. Reboot: ramoops registers, pstore_get_records(0) reads old crash,
allocates old_log with size X
2. Crash handler registered, timer started (if pstore_update_ms >= 0)
3. Oops happens (non-fatal, system continues)
4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X)
5. pstore_new_entry = 1, pstore_timer_kick() called
6. System continues running (not a panic oops)
7. Timer fires after pstore_update_ms milliseconds
8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1)
9. ramoops_get_next_prz() → persistent_ram_save_old()
10. buffer_size() returns Y, but old_log is X bytes
11. Y > X: memcpy_fromio() overflows heap
Requirements:
- a prior crash record exists that did not fill the record size
(almost impossible since the crash handler writes as much as it
can possibly fit into the record, capped by max record size and
the kmsg buffer almost always exceeds the max record size)
- pstore_update_ms >= 0 (disabled by default)
- Non-fatal oops (system survives)
Free and reallocate the buffer when the new size differs from the
previously allocated size. This ensures old_log always has sufficient
space for the data being copied. |
