| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes()
svdm_consume_modes() checks pmdata->altmodes against the array size once
before the loop over the count, but forgot to check the bound at every
point in the loop.
In the well-behaved SVDM discovery flow this is harmless because each of
at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX
modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the
CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming
ACK with any request the port actually sent. Once port->partner is set,
an unsolicited Discover Modes ACK is consumed unconditionally. A broken
or malicious port partner can therefore drive altmodes to
ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra
Discover Modes ACK with seven VDOs. Because the pre-loop check passes,
the loop could then writes up to five entries past altmode_desc[]. For
mode_data_prime the next field in struct tcpm_port is the
partner_altmode[] pointer array, which then receives partner-chosen
SVID/VDO bytes.
Move the bound check inside the loop so the array can never be indexed
past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner
supplies or how the function was reached. |
| In the Linux kernel, the following vulnerability has been resolved:
gcov: use atomic counter updates to fix concurrent access crashes
GCC's GCOV instrumentation can merge global branch counters with loop
induction variables as an optimization. In inflate_fast(), the inner copy
loops get transformed so that the GCOV counter value is loaded multiple
times to compute the loop base address, start index, and end bound. Since
GCOV counters are global (not per-CPU), concurrent execution on different
CPUs causes the counter to change between loads, producing inconsistent
values and out-of-bounds memory writes.
The crash manifests during IPComp (IP Payload Compression) processing when
inflate_fast() runs concurrently on multiple CPUs:
BUG: unable to handle page fault for address: ffffd0a3c0902ffa
RIP: inflate_fast+1431
Call Trace:
zlib_inflate
__deflate_decompress
crypto_comp_decompress
ipcomp_decompress [xfrm_ipcomp]
ipcomp_input [xfrm_ipcomp]
xfrm_input
At the crash point, the compiler generated three loads from the same
global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and
end for an indexed loop. Another CPU modified the counter between loads,
making the values inconsistent - the write went 3.4 MB past a 65 KB
buffer.
Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in
the top-level Makefile, guarded by a try-run compile test. The test
compiles a minimal program with and without -fprofile-update=prefer-atomic
using the full KBUILD_CFLAGS, then compares undefined symbols in the
resulting object files. If prefer-atomic introduces new undefined
references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax
on arm64 with outline-atomics), the flag is not added -- the kernel does
not link against libatomic.
On architectures where GCC inlines 64-bit atomic counter updates (x86_64,
s390, ...) the test passes and the flag is enabled, preventing the
compiler from merging counters with loop induction variables and fixing
the observed concurrent-access crash.
On architectures where the flag would introduce libatomic dependencies, it
is silently omitted and behaviour is no worse than before this patch.
Move the CFLAGS_GCOV block from its original position (before the arch
Makefile include) to after the core KBUILD_CFLAGS assignments but before
the scripts/Makefile.gcc-plugins include. This placement ensures the
try-run test sees arch-specific flags (-m32, -march=,
-mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that
would break the test on clean builds when plugin shared objects do not yet
exist. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: size fh_verify server sockaddr slot by xpt_locallen
The nfsd_fh_verify and nfsd_fh_verify_err tracepoints declare the
server sockaddr slot sized by xpt_remotelen but fill it from
xpt_local using xpt_locallen:
TP_STRUCT__entry(
...
__sockaddr(server, rqstp->rq_xprt->xpt_remotelen)
...
)
TP_fast_assign(
...
__assign_sockaddr(server, &rqstp->rq_xprt->xpt_local,
rqstp->rq_xprt->xpt_locallen);
...
)
When xpt_locallen exceeds xpt_remotelen, __assign_sockaddr's memcpy
writes past the reserved ring-buffer slot. In the reverse direction
(xpt_locallen < xpt_remotelen) the slot is oversized and the
unwritten tail leaks prior ring-buffer contents to trace consumers.
The write-past-end case is reachable on NFS/UDP. svc_xprt_set_remote()
is only called from svc_tcp_accept() (net/sunrpc/svcsock.c) and from
the RDMA connect path; svc_create_socket() for UDP calls only
svc_xprt_set_local(), so xpt_remotelen stays 0 for the xprt's
lifetime. Every fh_verify trace for an NFSv2/v3-over-UDP request
then copies 16 or 28 bytes from xpt_local into a zero-byte slot.
The other NFSD tracepoints that record the server address
(NFSD_TRACE_PROC_CALL_FIELDS, NFSD_TRACE_PROC_RES_FIELDS,
SVC_RQST_ENDPOINT_FIELDS) already size the server slot by
xpt_locallen; nfsd_fh_verify and nfsd_fh_verify_err were the only
exceptions.
Fix by sizing the server slot with xpt_locallen so the declared slot
matches the copy length. The client slot and its assignment already
agree on xpt_remotelen and are left untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in __bpf_get_stack
get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and
releases its recursion slot via put_callchain_entry() before returning,
so nothing keeps the entry reserved while __bpf_get_stack() consumes
it below.
A preemptible BPF program (e.g. a non-sleepable raw tracepoint program
on a PREEMPT kernel, which runs under migrate_disable() but not
preempt_disable()) can be scheduled out between obtaining the entry
and the copy. Another task scheduled on the same CPU then reuses the
same per-CPU buffer and overwrites trace->nr with a larger value.
copy_len is then computed from the inflated trace->nr and can exceed
the caller's buffer, causing an out-of-bounds write in the memcpy()
and in the build_id path.
The rcu_read_lock() taken here alone does not prevent this. It is
only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does
not disable preemption; it merely keeps perf's callchain buffer array
alive (freed via call_rcu()) and does nothing to stop another task
from reusing the entry.
Disable preemption around obtaining the callchain entry and copying
it into the caller's buffer, so the entry cannot be reused underneath
us and trace->nr stays bounded by max_depth. Build ID resolution may
fault and is therefore deferred until after preemption is re-enabled;
by then the instruction pointers have already been copied into buf,
so it operates only on that private copy. Note, preempt_disable() also
subsumes the buffer-lifetime guarantee the rcu_read_lock() provided,
since a preempt-disabled section is an RCU read-side critical section
for the callchain buffers' call_rcu() reclaim.
[ changed Fixes: commit ] |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject inline replies that overflow the pull-up buffer
An RPC-over-RDMA client can request a reply, such as an NFS READ
payload, without providing a Write list or a Reply chunk to carry
it. When such a reply needs more scatter/gather entries than the
device's Send Queue supports, svc_rdma_pull_up_needed() selects
pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole
reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size
bytes, while the reply on this path is bounded only by the client's
request, so svc_rdma_xb_linearize() copies past the end of the
buffer and corrupts adjacent slab memory. The oversized length is
then stored in sc_sges[0].length and posted, so the device also
reads beyond the mapped region.
The SGE-exhaustion branch is the only pull-up path that can exceed
the buffer: the threshold branch pulls up only replies smaller
than RPCRDMA_PULLUP_THRESH, and replies that fit the device's SGE
budget are sent directly without linearization. Make
svc_rdma_pull_up_needed() report -E2BIG when the reply it would
pull up cannot fit sc_max_req_size, and fail the request with
ERR_CHUNK as RFC 8166 Section 4.5.3 directs rather than dropping
the connection.
The helper no longer answers a simple yes/no question: it now
reports pull-up, no pull-up, or -E2BIG for a reply too large to
linearize. Rename svc_rdma_pull_up_needed() to
svc_rdma_check_pull_up() so its name no longer implies a boolean
predicate. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: bound the device EEPROM address before the EFUSE copy
mt7915_mcu_get_eeprom() copies a fixed EFUSE block into the driver's
dev->mt76.eeprom.data buffer at the offset reported by the MCU response
(res->addr, a device-controlled __le32) without checking it against the
buffer size. A malicious or malfunctioning device can report an arbitrary
address and drive a 16-byte out-of-bounds write past eeprom.data.
Reject a response whose address would place the copy outside eeprom.data
before deriving the destination pointer. Devices that echo the requested
in-bounds offset are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy
mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block
copy from the address reported by the MCU response (event->addr, a
device-controlled __le32) and clamps only the copy length, never the
destination offset into dev->mt76.eeprom.data. A malicious or
malfunctioning device can report an arbitrary address and drive an
out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past
eeprom.data.
Reject a response whose address would place the copy outside eeprom.data
before deriving the destination pointer. Devices that echo the requested
in-bounds offset are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: bound interrupt-vector register fill to the allocated array
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: npc: Fix size of entry2cntr_map
KASAN prints below splat. This is caused by allocating counter for
reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map
is not allocated for reserved entries.
BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0
Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14
CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1
Hardware name: Marvell CN106XX board (DT)
Workqueue: events work_for_cpu_fn
Call trace:
dump_backtrace.part.0+0xe4/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x88/0xb4
print_report+0x154/0x458
kasan_report+0xb8/0x194
__asan_store2+0x7c/0xa0
npc_map_mcam_entry_and_cntr+0xb0/0x1a0
rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280
npc_install_flow+0x840/0xfe0
rvu_npc_install_cpt_pass2_entry+0x138/0x190
rvu_nix_init+0x148c/0x2880
rvu_probe+0x1800/0x30b0
local_pci_probe+0x78/0xe0
work_for_cpu_fn+0x30/0x50
process_one_work+0x4cc/0x97c
worker_thread+0x360/0x630
kthread+0x1a0/0x1b0
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
alpha: fix user-space corruption during memory compaction
Alpha systems can suffer sporadic user-space crashes and heap
corruption when memory compaction is enabled.
Symptoms include SIGSEGV, glibc allocator failures (e.g. "unaligned
tcache chunk"), and compiler internal errors. The failures disappear
when compaction is disabled or when using global TLB invalidation.
The root cause is insufficient TLB shootdown during page migration.
Alpha relies on ASN-based MM context rollover for instruction cache
coherency, but this alone is not sufficient to prevent stale data or
instruction translations from surviving migration.
Fix this by introducing a migration-specific helper that combines:
- MM context invalidation (ASN rollover),
- immediate per-CPU TLB invalidation (TBI),
- synchronous cross-CPU shootdown when required.
The helper is used only by migration/compaction paths to avoid changing
global TLB semantics.
Additionally, update flush_tlb_other(), pte_clear(), to use
READ_ONCE()/WRITE_ONCE() for correct SMP memory ordering.
This fixes observed crashes on both UP and SMP Alpha systems. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted). |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: move vdpa group bound check to vhost_vdpa
Remove duplication by consolidating these here. This reduces the
posibility of a parent driver missing them.
While we're at it, fix a bug in vdpa_sim where a valid ASID can be
assigned to a group equal to ngroups, causing an out of bound write. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: validate length in dlm_search_rsb_tree
The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().
Add length validation to prevent potential buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Mitigate potential OOB by removing bogus memset()
The memset() in hid_report_raw_event() has the good intention of
clearing out bogus data by zeroing the area from the end of the incoming
data string to the assumed end of the buffer. However, as we have
previously seen, doing so can easily result in OOB reads and writes in
the subsequent thread of execution.
The current suggestion from one of the HID maintainers is to remove the
memset() and simply return if the incoming event buffer size is not
large enough to fill the associated report.
Suggested-by Benjamin Tissoires <bentiss@kernel.org>
[bentiss: changed the return value] |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry
Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X
interrupt to the host using a writel(), which generates a PCI posted write
transaction. There's no completion for posted writes, so the writel() may
return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also
unmaps the outbound ATU entry used for the PCI write, so the write races
with the unmap.
If the PCI write loses the race with the ATU unmap, the write may corrupt
host memory or cause IOMMU errors, e.g., these when running fio with a
larger queue depth against nvmet-pci-epf:
arm-smmu-v3 fc900000.iommu: 0x0000010000000010
arm-smmu-v3 fc900000.iommu: 0x0000020000000000
arm-smmu-v3 fc900000.iommu: 0x000000090000f040
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0
arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0
Flush the write by performing a readl() of the same address to ensure that
the write has reached the destination before the ATU entry is unmapped.
The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit
8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there
it was solved by dedicating an outbound iATU only for MSI. We can't do the
same for MSI-X because each vector can have a different msg_addr and the
msg_addr may be changed while the vector is masked.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Prevent excessive number of frames
In this case, the user constructed the parameters with maxpacksize 40
for rate 22050 / pps 1000, and packsize[0] 22 packsize[1] 23. The buffer
size for each data URB is maxpacksize * packets, which in this example
is 40 * 6 = 240; When the user performs a write operation to send audio
data into the ALSA PCM playback stream, the calculated number of frames
is packsize[0] * packets = 264, which exceeds the allocated URB buffer
size, triggering the out-of-bounds (OOB) issue reported by syzbot [1].
Added a check for the number of single data URB frames when calculating
the number of frames to prevent [1].
[1]
BUG: KASAN: slab-out-of-bounds in copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487
Write of size 264 at addr ffff88804337e800 by task syz.0.17/5506
Call Trace:
copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487
prepare_playback_urb+0x953/0x13d0 sound/usb/pcm.c:1611
prepare_outbound_urb+0x377/0xc50 sound/usb/endpoint.c:333 |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: ftrace: Fix memory corruption when kernel is located beyond 32 bits
Since commit e424054000878 ("MIPS: Tracing: Reduce the overhead of
dynamic Function Tracer"), the macro UASM_i_LA_mostly has been used,
and this macro can generate more than 2 instructions. At the same
time, the code in ftrace assumes that no more than 2 instructions can
be generated, which is why it stores them in an int[2] array. However,
as previously noted, the macro UASM_i_LA_mostly (and now UASM_i_LA)
causes a buffer overflow when _mcount is beyond 32 bits. This leads to
corruption of the variables located in the __read_mostly section.
This corruption was observed because the variable
__cpu_primary_thread_mask was corrupted, causing a hang very early
during boot.
This fix prevents the corruption by avoiding the generation of
instructions if they could exceed 2 instructions in
length. Fortunately, insn_la_mcount is only used if the instrumented
code is located outside the kernel code section, so dynamic ftrace can
still be used, albeit in a more limited scope. This is still
preferable to corrupting memory and/or crashing the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix list corruption after hardware restart
Since stations are recreated from scratch, all lists that wcids are added
to must be cleared before calling ieee80211_restart_hw.
Set wcid->sta = 0 for each wcid entry in order to ensure that they are
not added again before they are ready. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix memory corruption when FW resources change during ifdown
bnxt_set_dflt_rings() assumes that it is always called before any TC has
been created. So it doesn't take bp->num_tc into account and assumes
that it is always 0 or 1.
In the FW resource or capability change scenario, the FW will return
flags in bnxt_hwrm_if_change() that will cause the driver to
reinitialize and call bnxt_cancel_reservations(). This will lead to
bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc
may be greater than 1. This will cause bp->tx_ring[] to be sized too
small and cause memory corruption in bnxt_alloc_cp_rings().
Fix it by properly scaling the TX rings by bp->num_tc in the code
paths mentioned above. Add 2 helper functions to determine
bp->tx_nr_rings and bp->tx_nr_rings_per_tc. |
