| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Server-Side Request Forgery (SSRF), Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.1.
DoclingProducer decided what a String message body meant by inspecting its prefix. A body starting with http:// or https:// was handed to Docling as a remote URL to fetch, a body starting with / or containing a backslash was read from the local filesystem, and anything else was written to a temporary file and converted as document content. The mode was chosen implicitly and no endpoint option allowed a route author to pin the component to a single interpretation, so a route that means convert whatever text arrives in the body silently became a fetcher of remote resources or a reader of local files whenever the text happened to begin with one of those prefixes. The only guard applied to the derived value was a size check, and that check was wrapped in an existence test, so a path that resolved to nothing, or to a pseudo-file reporting a size of zero, passed without being checked at all. Five call sites reached the two sinks: the CLI mode appended the value as the final positional argument of the docling subprocess, and the docling-serve mode passed it either to HttpSource for the backend to fetch or to Files.readAllBytes so that the content could be base64-encoded and uploaded. Because the exchange body is never filtered by a HeaderFilterStrategy, unlike the Camel header namespace, a sender able to place text in a message that a route forwards into a docling endpoint could reach both sinks without any opt-in from the deployment.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, do not route message bodies that originate outside the deployment into a docling endpoint, and pass the document through a typed body such as File, byte[] or InputStream, or through the CamelDoclingInputFilePath header, so that the body is never subject to prefix interpretation. |
| Missing Authorization vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
An unauthenticated or unauthorized user can retrieve the invited-user list associated with a non-public question due to missing visibility authorization checks.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| Exposure of Data Element to Wrong Session vulnerability in Apache Camel AS2 component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
Signing material belonging to an individual request was stored in state that is shared across requests rather than confined to the request being processed. Where a deployment serves more than one trading partner, concurrent or successive requests could therefore observe each other's material, and a Message Disposition Notification could be signed with the key of a partner other than the one the receipt was for. The result is cross-partner key confusion: a receipt attributable to the wrong partner, and one partner's signing material used while handling another partner's exchange. AS2 deployments are typically multi-partner by design, so the condition is reached by ordinary concurrent traffic rather than by anything the attacker must arrange.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Per-request signing keys are now confined to the request being processed in ResponseMDN. For deployments that cannot upgrade immediately, run a separate Camel context per trading partner so that no signing material is shared between them. |
| Insertion of Sensitive Information into Log File vulnerability in Apache Camel MLLP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The camel-mllp component carries a logPhi option that governs whether HL7 payload content may be written to the log. It defaulted to true, so a deployment that did nothing logged protected health information out of the box. Two further paths wrote payload content to the log regardless of the setting, so even an operator who had turned logPhi off was still exposed on those paths. MLLP is used to carry HL7 clinical messages, so the content concerned is patient data, and it reached ordinary application logs where it is subject to whatever retention, aggregation and access the deployment applies to logs generally rather than to clinical records.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. logPhi now defaults to false and is honoured on the paths that previously ignored it. This is a changed default: a deployment that relied on payload logging must now set logPhi=true explicitly. Because the upgrade guide for a change like this lives on the main branch only, operators upgrading within the 4.18.x or 4.22.x lines should treat this advisory as the notice of that change. For deployments that cannot upgrade immediately, set logPhi=false and be aware that two paths will continue to log payload content until the fix is applied; restrict access to the logs accordingly. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CXF component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When a route behind a CXF SOAP consumer failed with an exception the service contract does not declare, the exception was described back to the SOAP client in the fault: CXF copies the message into the SOAP faultstring, and can be configured to place the stack trace in the fault detail. An external caller able to provoke a failure could therefore read internal detail about the deployment - class and package names, and whatever the exception message carries. Declared faults, annotated @WebFault, are a different matter: those are part of the published contract that clients are written against, and suppressing them would break the service rather than protect anything.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, replaces an undeclared route failure with a generic fault carrying no class name, message or stack trace. Faults the contract declares are reported exactly as before. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, declare the exceptions the service is allowed to report and map every other failure onto one of them in an onException handler, so no undeclared exception reaches the fault. |
| Improper Handling of Case Sensitivity vulnerability in Apache Camel Platform HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The guard that prevents a request header being reflected into the response compared header names case sensitively, while HTTP header names are case insensitive. A caller could therefore defeat the suppression simply by varying the case of the header name. HTTP/2 makes the problem unconditional rather than optional: the protocol requires header names to be lowercase on the wire, so the comparison never matched and the suppression was inert for every request on an HTTP/2 connection. The consequence is that content the caller chose is echoed back in the response, which is the basis for response-splitting and cache-poisoning style attacks against whatever sits in front of the Camel endpoint.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Request header names are now compared case insensitively, so the suppression holds regardless of casing and works under HTTP/2. For deployments that cannot upgrade immediately, strip the headers in question in front of the Camel endpoint, or remove them from the response in the route rather than relying on the built-in suppression. |
| Improper Input Validation vulnerability in Apache Camel Tika component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Tika producer mapped every metadata key parsed out of the submitted document onto the Exchange as a header, with no filter applied. Document metadata is attacker-controlled content: the party that supplies the file chooses the metadata keys it carries. A crafted document could therefore set Exchange headers that the rest of the route depends on, including headers in the Camel namespace such as CamelFileName, which downstream components use to decide where content is written. The pattern is the same header-injection class as the consumer advisories published previously, reached here through parsed file content rather than through a protocol header.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Parsed document metadata is now filtered through a HeaderFilterStrategy before it is mapped onto the Exchange. A route that was reading a metadata-derived header the filter now blocks will see it missing. For deployments that cannot upgrade immediately, strip the Camel namespace after the Tika producer with removeHeaders("Camel*") before any component that acts on those headers. |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Apache Camel PQC component.
This issue affects Apache Camel: from 4.12.0 before 4.18.5, from 4.19.0 before 4.22.1.
The producer held a single java.security.Signature instance and used it for every exchange without synchronizing access. Signature is stateful and is not thread safe: update() accumulates the data to be signed or verified, and verify() consumes that accumulated state. With concurrent exchanges sharing one instance the update and verify calls of different messages interleave, so a verification can complete against data that belongs to another exchange, or against a partially accumulated buffer. The outcome is non-deterministic and includes a verification reporting success for a message whose signature was never actually checked, which defeats the guarantee the component exists to provide. Reaching it requires concurrent traffic through the same endpoint, which is the ordinary condition for a Camel route under load.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The Signature instance is no longer shared across concurrent exchanges. For deployments that cannot upgrade immediately, restrict the affected route to a single concurrent consumer so that no two exchanges use the instance at once. |
| Improper Certificate Validation vulnerability in Apache Camel Knative component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When SSL was enabled on the Knative HTTP client but no truststore was configured, the client options fell back to trusting every presented certificate rather than to the JVM's default trust anchors. A deployment that switched TLS on without also configuring a truststore therefore obtained an encrypted connection with no peer authentication, which an attacker positioned on the network path can terminate and read. The dangerous state is reached by omission rather than by an explicit opt-in, which is what makes it a framework defect: turning TLS on should not be the thing that turns certificate validation off.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. With no truststore configured the trust options are now left unset so the JVM default trust anchors apply, the same fallback SSLContextParameters and the rest of Camel use. Trusting every certificate is now reached only by asking for it explicitly through the trust.all property, which remains available for development against a cluster with a self-signed certificate. For deployments that cannot upgrade immediately, configure a truststore explicitly wherever SSL is enabled. After upgrading, a deployment that was relying on the implicit trust-all behaviour must either configure a truststore or set the trust.all property deliberately. |
| Improper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel.
This issue affects Apache Camel: from 4.4.0 before 4.18.5, from 4.19.0 before 4.22.1.
The dynamic-router-control endpoint, introduced in 4.4.0, lets routing participants manage Dynamic Router subscriptions by sending control messages. When it handled a subscribe or update request, DynamicRouterControlProducer took the subscription predicate and the name of the language used to compile it from the incoming message, either from the predicate and expressionLanguage fields of a DynamicRouterControlMessage body or from the CamelDynamicRouterPredicate and CamelDynamicRouterExpressionLanguage headers. DynamicRouterControlService then resolved that language from the CamelContext and compiled the expression into a Predicate, with no allow-list and no opt-in. The compiled predicate was added to the channel's rule base and evaluated against every exchange routed through the corresponding dynamic-router endpoint for as long as the subscription existed. A route that forwards messages from an external transport to the control endpoint, as shown in the component documentation for routing participants in other JVMs or applications, therefore let any actor able to send a message on that transport supply an expression of their choosing, which was evaluated with the privileges of the Camel process. Any expression language available on the classpath could be selected, including the simple language, which is always present and was the default on the header path, so removing optional expression languages from the classpath did not prevent the issue. Exploitation requires the ability to send a message on a transport whose route forwards it to a dynamic-router-control endpoint; no other authentication or user interaction is needed. Releases before 4.4.0 are not affected, because their control channel took predicate expressions only from the endpoint URI configured by the route author.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. After upgrading, a control message that carries a predicate expression or an expression language is rejected unless the new allowPredicateFromMessage option is enabled on the dynamic-router-control endpoint; enable it only when every sender of control messages is trusted. For deployments that cannot upgrade immediately, do not forward messages from untrusted or shared transports to a dynamic-router-control endpoint. Where control messages must cross such a transport, authenticate the sender and make sure the predicate and expression language of each subscription are set by the route rather than taken from the incoming message, for example by removing the CamelDynamicRouterPredicate and CamelDynamicRouterExpressionLanguage headers and clearing the predicate and expressionLanguage fields of a DynamicRouterControlMessage before it reaches the endpoint. Removing optional expression languages from the classpath is not a sufficient workaround. As defence in depth, restrict who can send to the transports that feed the control endpoint, and on 4.23.0 and 4.22.1 set the allowedSchemes option of the dynamic-router endpoint to limit which endpoints a subscription's destinationUri may name. |
| Improper Authentication vulnerability in Apache Camel OAuth component.
This issue affects Apache Camel: from 4.11.0 before 4.18.5, from 4.19.0 before 4.22.1.
The camel-oauth processors that guard a route did not stop the exchange when authentication could not be completed. Where a failure to establish an authenticated session should have terminated routing and returned an error to the caller, the processors fell through and returned control to the route, so the request continued to the protected endpoint as though authentication had succeeded. The effect is a fail-open authentication guard: an unauthenticated caller reached whatever the route did next. The condition is reached on the ordinary request path of a route configured to require OAuth, and needs no special configuration or prior access on the caller's part.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The processors now stop the exchange and set the appropriate error status whenever an authenticated session cannot be established, so a failed authentication no longer reaches the protected part of the route. For deployments that cannot upgrade immediately, place an explicit authorization check after the OAuth processor rather than relying on it to halt the exchange, and verify that the route stops on failure. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Azure Files component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the azure-files scheme. Its consumer derives from the same RemoteFileConsumer base class and composed the remote path through a plain concatenation helper, so it inherited the same unconstrained resolution. Reaching it requires a listing name that is not a single path segment, which the Azure Files REST service does not normally return; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. |
| FopProducer transforms the incoming XSL-FO message body by creating a javax.xml.transform.TransformerFactory through TransformerFactory.newInstance() and enabling only FEATURE_SECURE_PROCESSING before running an identity transform over the body. On the JDK's built-in transformer, that feature alone already empties the accessExternalDTD and accessExternalStylesheet limits, so an external DTD or entity is refused. When a third-party JAXP TransformerFactory such as Saxon-HE is on the classpath, for example because the application also uses camel-xslt-saxon or camel-saxon, TransformerFactory.newInstance() returns that implementation instead, and FEATURE_SECURE_PROCESSING on its own does not restrict external resource access on it. A DOCTYPE with an external subset, or an external general entity, declared in the XSL-FO document is then resolved and expanded while the body is transformed. An external sender whose XSL-FO reaches a fop producer could therefore read files readable by the Camel process and cause the process to issue requests to hosts the document names. camel-fop does not bring such a factory itself, and excludes Xalan, so a default deployment using the JDK transformer is not affected; the issue is reachable only where another component has placed an alternative JAXP TransformerFactory on the classpath. Releases on the 4.14.x line and earlier reached end of life before this issue was resolved and do not receive a fix. |
| Incorrect implementation of authentication algorithm vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
A flaw in the User Center login integration can cause a newly created external user session to omit its external identity, allowing subsequent requests to bypass central account suspension or deletion checks until the session
expires or is revoked.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| Improper Authentication vulnerability in Apache Camel Keycloak component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.1.
The security processor validated the issuer of an introspected token only when the introspection response actually carried an iss claim. When the claim was absent the check was skipped rather than treated as a failure, so a token that the configured issuer did not mint could be accepted provided the introspection endpoint answered without naming an issuer. Reaching this requires an introspection endpoint that omits iss and accepts tokens from more than one issuer, which is not the default Keycloak arrangement, hence the low severity; where that arrangement exists the consequence is that the deployment authenticates a caller it should have rejected.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. An absent iss claim is now treated as a validation failure rather than as a reason to skip the check. For deployments that cannot upgrade immediately, ensure the introspection endpoint returns the iss claim, and that it serves exactly one issuer. |
| Incorrect Default Permissions vulnerability in Apache Camel PQC component.
This issue affects Apache Camel: from 4.12.0 before 4.18.5, from 4.19.0 before 4.22.1.
When the component wrote generated key material to disk it did so with the permissions the process default umask produced, rather than restricting the file to its owner. On a host whose umask allows group or world read, the private key was therefore readable by other local accounts. The exposure is to a local party rather than to the remote sender that the Camel threat model treats as the primary adversary, which is why the severity is assessed low, but the consequence where it applies is complete: possession of the private key defeats every signature and key exchange the deployment performs with it.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Key material is now written with owner-only permissions. For deployments that cannot upgrade immediately, place the key directory on a path only the service account can traverse, and tighten the process umask. Key material already written with permissive permissions should be treated as exposed and rotated. |
| Improper Input Validation vulnerability in Apache Camel Core component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The saga processor consulted a header named Long-Running-Action to decide which saga an exchange belonged to. The name carries no Camel prefix, so it sits outside the namespace that consumer header filters block, and an external sender could supply it on an inbound message. That let the sender name the saga the exchange joined, attaching their request to a long-running action started by someone else, or causing compensation to be associated with an action they did not initiate. The header is only consulted by a saga service that uses it, which bounds the exposure to deployments running sagas over an LRA coordinator.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The header is now consulted only for a saga service that actually uses it, rather than on every exchange. For deployments that cannot upgrade immediately, strip the header at the trust boundary with removeHeaders("Long-Running-Action") on every consumer that accepts messages from an untrusted sender. |
| Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Jetty component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
Setting enableCORS on a Jetty endpoint installed Jetty's CrossOriginFilter with its stock defaults, which accept every origin and allow credentials. An operator asking for CORS therefore obtained a policy that lets a page on any origin make credentialed cross-origin requests to the endpoint and read the responses, without any indication that turning the option on had chosen an allow-all policy rather than an empty one to be filled in. This is the same defect class as the platform-http-vertx advisory published alongside it, in a different component.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. enableCORS no longer grants credentials to an origin the operator did not name. A deployment that relied on any origin being accepted must now list its origins explicitly. For deployments that cannot upgrade immediately, configure the CrossOriginFilter parameters explicitly rather than relying on what enableCORS installs, naming the allowed origins. |
| Improper Input Validation vulnerability in Apache Camel Mail component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
CVE-2026-46584 addressed mail headers reaching the Exchange without passing through a header filter, but the MimeMultipart data format retained an unfiltered path: unmarshalling a multipart message mapped mail.smtp headers onto the Exchange with no filter applied. Those names sit outside the Camel namespace that consumer filters block, so a message crafted by an external sender could still set them, and the mail.smtp namespace influences how a downstream mail producer connects and sends. This is an incomplete fix of CVE-2026-46584 rather than a new class of defect: a deployment that applied that advisory and considered camel-mail settled remained exposed on this path.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The MimeMultipart data format now applies the header filter on unmarshal, closing the path CVE-2026-46584 left open. For deployments that cannot upgrade immediately, strip the namespace after the data format with removeHeaders("mail.smtp*") before any mail producer. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel gRPC component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When a route behind a gRPC consumer failed, the exception's message was placed into the gRPC status description. Unlike the status cause, which stays local to the server, the description is transmitted to the calling client, so an external caller able to provoke a failure could read the internal error message. What that discloses depends on the exception, and in practice includes class and package names, paths, host names and connection detail carried in messages. This is the gRPC member of the same unmuted-consumer-exception family as the knative, mina and CXF advisories published alongside it.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, puts a generic description in the status instead of the route exception's message. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, map failures onto an explicit status in an onException handler so the framework never copies the exception message into the description. |
