| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to clear dirty flag on folio in error path
If node block is corrupted due to chksum mismatch or inconsistent
footer info, it needs to drop clear flag of node folio, in order
to persist inconsistent node data to storage. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid force-completing uninitialized UVD rings
uvd_v7_0_sw_init() does not initialize the UVD decode ring for an
SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes
the decode ring when restoring its fence sequence.
Skip fence completion when the fence driver is not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the MES ring fences on reset
The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is
skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses
a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1
reset, while fence_drv.sync_seq keeps advancing for every packet.
When the reset is triggered because MES itself stopped responding, the
timed-out packets advance sync_seq past the last hw fence value MES wrote.
After resume the first MES submission polls forever on a seq that is never
written back, failing the resume and wedging the box on a second reset:
amdgpu: MES ring buffer is full.
amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110)
amdgpu: resume of IP block <gfx_v11_0> failed -110
amdgpu: GPU reset end with ret = -110
Force complete the MES scheduler ring fences together with the scheduler rings
so their hw fence is realigned to sync_seq.
v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
It's pointless to call WARN_ON() in case of an allocation failure in
dev_change_net_namespace() and device_rename(), since it only leads to
useless splats caused by deliberate fault injections, so avoid it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio state after ENOMEM whilst under writeback iteration
Fix the state of the current folio when ENOMEM occurs during writeback
iteration. The folio needs to be redirtied and unlocked before the
terminal writeback_iter() is invoked. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: use wiphy work for socket owner autodisconnect
nl80211_netlink_notify() walks the cfg80211 wireless device list when a
NETLINK_GENERIC socket is released. If the socket owns a connection, the
notifier queues the embedded wdev->disconnect_wk work item.
That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a
NETLINK_URELEASE notifier that already observed conn_owner_nlportid can
queue it after that cancel returns. _cfg80211_unregister_wdev() then
removes the wdev from the list and waits for RCU readers, but
synchronize_net() does not drain work queued by such a reader.
Make the autodisconnect work a wiphy_work instead. The callback already
needs the wiphy mutex, and wiphy_work runs under that mutex. This lets
teardown cancel pending autodisconnect work while holding the mutex,
without a cancel_work_sync() vs. worker locking concern.
Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any
NETLINK_URELEASE notifier that had already reached the wdev list has then
either queued the work and it is removed, or can no longer find the wdev. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing locking around retry adding new subreqs
Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take
the appropriate lock when adding extra subrequests into
stream->subrequests. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
walk_s1() and kvm_walk_nested_s2() expect to be called while holding
kvm->srcu to guard against memslot changes. While this is generally
the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the
respective walkers without taking kvm->srcu.
Fix by acquiring kvm->srcu prior to the table walk in both instances. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock between reflink and transaction commit when using flushoncommit
When using the flushoncommit mount option, we can have a deadlock between
a transaction commit and a reflink operation that copied an inline extent
to an offset beyond the current i_size of the destination node.
The deadlock happens like this:
1) Task A clones an inline extent from inode X to an offset of inode Y
that is beyond Y's current i_size. This means we copied the inline
extent's data to a folio of inode Y that is beyond its EOF, using a
call to copy_inline_to_page();
2) Task B starts a transaction commit and calls
btrfs_start_delalloc_flush() to flush delalloc;
3) The delalloc flushing sees the new dirty folio of inode Y and when it
attempts to flush it, it ends up at extent_writepage() and sees that
the offset of the folio is beyond the i_size of inode Y, so it attempts
to invalidate the folio by calling folio_invalidate(), which ends up at
btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it
tries to lock the folio's range in inode Y's extent io tree, but it
blocks since it's currently locked by task A - during a reflink we lock
the inodes and the source and destination ranges after flushing all
delalloc and waiting for ordered extent completion - after that we
don't expect to have dirty folios in the ranges, the exception is if
we have to copy an inline extent's data (because the destination offset
is not zero);
4) Task A then attempts to start a transaction to update the inode item,
and then it's blocked since the current transaction is in the
TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the
current transaction to become unblocked (its state >=
TRANS_STATE_UNBLOCKED).
So task A is waiting for the transaction commit done by task B, and
the later waiting on the extent lock of inode Y that is currently
held by task A.
Syzbot recently reported this with the following stack traces:
INFO: task kworker/u8:7:1053 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000
Workqueue: writeback wb_workfn (flush-btrfs-46)
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5298 [inline]
__schedule+0x1553/0x5240 kernel/sched/core.c:6911
__schedule_loop kernel/sched/core.c:6993 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7008
wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline]
btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914
btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline]
btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704
extent_writepage fs/btrfs/extent_io.c:1852 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline]
btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713
do_writepages+0x32e/0x550 mm/page-writeback.c:2554
__writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750
writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042
wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227
wb_do_writeback fs/fs-writeback.c:2374 [inline]
wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414
process_one_work kernel/workqueue.c:3276 [inline]
process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359
worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
INFO: task syz.4.64:6910 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.4.64 state:D stack:22752 pid:6910 tgid:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages
LOCALIO is an NFS loopback mount optimization that avoids using the
network for READ, WRITE and COMMIT if the NFS client and server are
determined to be on the same system. But because LOCALIO is still
fundamentally "just NFS loopback mount" it is susceptible to recursion
deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then
back into NFS via nfs_writepages.
Fix LOCALIO's potential for direct reclaim deadlock by ensuring that
all its page cache allocations are done from GFP_NOFS context.
Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs:
prevent stack overflows from page cache allocation"). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Add missing save/restore handling of LBR MSRs
MSR_IA32_DEBUGCTLMSR and LBR MSRs are currently not enumerated by
KVM_GET_MSR_INDEX_LIST, and LBR MSRs cannot be set with KVM_SET_MSRS. So
save/restore is completely broken.
Fix it by adding the MSRs to msrs_to_save_base, and allowing writes to
LBR MSRs from userspace only (as they are read-only MSRs) if LBR
virtualization is enabled. Additionally, to correctly restore L1's LBRs
while L2 is running, make sure the LBRs are copied from the captured
VMCB01 save area in svm_copy_vmrun_state().
Note, for VMX, this also fixes a flaw where MSR_IA32_DEBUGCTLMSR isn't
reported as an MSR to save/restore.
Note #2, over-reporting MSR_IA32_LASTxxx on Intel is ok, as KVM already
handles unsupported reads and writes thanks to commit b5e2fec0ebc3 ("KVM:
Ignore DEBUGCTL MSRs with no effect") (kvm_do_msr_access() will morph the
unsupported userspace write into a nop).
[sean: guard with lbrv checks, massage changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: fix wrong transport_header when sending VLAN-tagged frame
In tap_get_user_xdp(), when processing a VLAN-tagged frame (e.g.
ETH_P_8021Q), skb_set_network_header() is called first to advance
network_header past the VLAN tag to the inner protocol header.
skb_probe_transport_header() is then called with skb->protocol still
set to ETH_P_8021Q, while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at the current nhoff via __skb_header_pointer(),
but that offset contains the inner protocol header (e.g. an IP header).
The bytes are misinterpreted as a VLAN header, yielding a garbage
encapsulated EtherType that matches no known protocol. The dissector
returns false, so skb_probe_transport_header() never calls
skb_set_transport_header(), leaving transport_header at its uninitialized
sentinel value (~0U).
Move skb_set_network_header() to after skb_probe_transport_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header (offset ETH_HLEN), so nhoff is correct and the
flow dissector can parse the VLAN header, extract the inner EtherType,
and advance nhoff to the inner protocol header, allowing transport_header
to be set correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Wrap user-invoked calls to fb_set_var() in helper
Handle fbcon during display updates in fb_set_var_from_user(). Check
with fbcon if the mode change is possible, update hardware state and
finally update fbcon. Update all callers.
Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other
mode-changes callers in sysfs and driver code are missing fbcon-related
steps.
With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain
fbcon state themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: initialize inode mapping flags for cached inodes
[BUG]
When running generic/795 with 8K block size, 4K page size, the test
always fails, triggering some ASSERT()s related to folio size:
795 (241074): drop_caches: 3
assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0)
------------[ cut here ]------------
kernel BUG at extent_io.c:1404!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs]
Call Trace:
<TASK>
btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3]
iter_file_splice_write+0x31a/0x540
direct_splice_actor+0x53/0x170
splice_direct_to_actor+0xe9/0x240
do_splice_direct+0x76/0xb0
vfs_copy_file_range+0x1fd/0x630
__x64_sys_copy_file_range+0xf9/0x220
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
The ASSERT() itself is added by a later patch.
The crash is triggered with that new debug patch, and without this fix.
[CAUSE]
In the above case, the start 16826368 is properly 8K aligned, but the
end (16830463 + 1) is not 8K aligned.
Furthermore the mapping's minimal folio order is 0, not the expected 1
for 8K block size with 4K page size.
So this means some inodes do not have btrfs_set_inode_mapping_order()
called on it.
The missing btrfs_set_inode_mapping_order() call happens for cached
inodes, through the following events:
- btrfs_create_new_inode() called for inode X
Which properly sets minimal folio order for the VFS inode.
- btrfs_update_inode() called for inode X
Which calls btrfs_delayed_update_inode() to create a delayed_node
into root->delayed_nodes xarray.
- Drop cache/memory pressure, evicting in-memory inode X
Which evicted the inode X, but delayed_node is still in
root->delayed_nodes for future reuse.
- btrfs_iget() for inode X called again
btrfs_iget()
|- btrfs_iget_locked()
| |- iget5_locked_rcu()
| Which creates a new vfs_inode for btrfs, whose mapping still
| has the minimal order as 0.
|
|- btrfs_read_locked_inode()
|- btrfs_fill_inode()
| |- btrfs_get_delayed_node()
| Which found out the previous node, and use that delayed
| node to initialize the new inode.
|
|- filled = true;
|- if (filled) goto cache_index;
Which skips the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls.
So the inode still has minimal folio order set as 0, not
the required 1.
Thus later page cache read will get a folio whose size is smaller than
block size, as the mapping has its minimal folio order set as 0 not 1,
then trigger the ASSERT().
[FIX]
Move the btrfs_update_inode_mapping_flags() and
btrfs_set_inode_mapping_order() calls under cache_index label,
so that the mapping flags and minimal folio order is always set
no matter if we have a cached inode. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix circular locking dependency in run_unpack_ex
Syzbot reported a circular locking dependency between wnd->rw_lock
(sbi->used.bitmap) and ni->file.run_lock.
The deadlock scenario:
1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock.
2. run_unpack_ex() takes wnd->rw_lock then tries to acquire
ni->file.run_lock inside ntfs_refresh_zone().
This creates an AB-BA deadlock.
Fix this by using down_read_trylock() instead of down_read() when
acquiring run_lock in run_unpack_ex(). If the lock is contended,
skip ntfs_refresh_zone() - the MFT zone will be refreshed on the
next MFT operation. This breaks the circular dependency since we
never block waiting for run_lock while holding wnd->rw_lock. |
