| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
Since the RX path was converted to zero-copy, the page pool page is handed
to the stack directly as the skb head, and the offset the DMA engine writes
at is what determines the alignment of the packet headers.
Before the conversion the payload was copied into an skb obtained from
napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The
conversion moved the headroom into stmmac_rx_offset() but did not carry
over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP
header now lands misaligned:
64 (NET_SKB_PAD) + 14 (ethernet) + 20 (IP) = 98
Same for the XDP branch:
256 (XDP_PACKET_HEADROOM) + 14 (ethernet) + 20 (IP) = 290
On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses
even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set.
Any received echo request panics the machine, e.g:
Unhandled fault: alignment exception (0x001) at 0x81873062
Internal error: : 1 [#1] SMP ARM
Hardware name: Altera SOCFPGA Arria10
PC is at icmp_echo+0x38/0xa8
LR is at icmp_rcv+0x22c/0x370
Call trace:
icmp_echo from icmp_rcv+0x22c/0x370
icmp_rcv from ip_protocol_deliver_rcu+0x2c/0x224
ip_protocol_deliver_rcu from ip_local_deliver+0xc8/0x1a0
ip_local_deliver from ip_sublist_rcv_finish+0x3c/0x50
ip_sublist_rcv_finish from ip_list_rcv_finish+0x110/0x118
ip_list_rcv_finish from ip_list_rcv+0xc8/0xdc
ip_list_rcv from __netif_receive_skb_list_core+0x170/0x1c0
...
napi_complete_done from stmmac_napi_poll_rx+0xcb0/0x1030
Code: e24dd068 e59020a0 e28dc010 e0822001 (e8920003)
Kernel panic - not syncing: Fatal exception in interrupt
The faulting instruction is the ldm of *icmp_hdr(skb) in icmp_echo().
Fix by adding NET_IP_ALIGN back to the RX offset, which restores the
alignment the stack used to get.
Note that commit a955318fe67e ("stmmac: align RX buffers") made a similar
change in 2021 and was reverted by commit 12d125b4574b ("stmmac: Revert
"stmmac: align RX buffers"") because it caused packet corruption. That
patch raised the offset from 0 without adjusting the buffer size
accounting, so the DMA engine could arguably write past the end of the RX
buffers, though this was never root caused.
Commit df542f669307 ("net: stmmac: Switch to zero-copy in non-XDP RX
path") since derives the page pool allocation from stmmac_rx_offset(), so
the extra bytes are accounted for. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_codel: clamp default quantum and mtu
fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which
overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(),
causing an infinite loop and soft lockup. Emulate fq_codel_change()
and constrain to [256, FQ_CODEL_QUANTUM_MAX].
The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit
below, and fq_codel_change() never updates it. codel_should_drop()
tests "*backlog <= params->mtu"; with mtu == 0x80000000 (~2 GiB) and
the default 32 MiB memory_limit, the test is always true, so CoDel is
silently and completely disabled (no drops, no ECN). Declare a single
clamped mtu and assign both q->quantum and q->cparams.mtu from it,
which also removes the double psched_mtu() call.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: clamp quantum before hhf_change() to avoid overflow
hhf_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) with no overflow
check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting
MTU 2147483634) makes weight * quantum overflow the signed deficit in
hhf_dequeue(), spinning forever.
Clamp q->quantum before hhf_change() so both the opt and !opt paths see
a sane quantum. Without this, bare "tc qdisc add ... hhf" succeeds with
a clamped quantum but "tc qdisc add ... hhf limit 1000" (any option
present) fails with -EINVAL because hhf_change() re-validates the
unclamped default (sch_hhf.c:559). 256 matches fq_codel's floor and is
a sane minimum for a DRR quantum.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix integer overflow of user QP buffer size
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix integer overflow in MFT cluster validation
In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are
validated against the volume size with:
if (mlcn * sct_per_clst >= sectors ||
mlcn2 * sct_per_clst >= sectors)
goto out;
mlcn and mlcn2 are u64 fields read directly from the boot sector.
sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus
the is_power_of_2() check below it), but the multiplication is done
in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn
near 2^62 with sct_per_clst == 4 wraps to 0, which compares below
any non-zero 'sectors', so the check is bypassed and the malformed
record is accepted.
The accepted mlcn is then used unchanged in
sbi->mft.lbo = mlcn << cluster_bits;
In practice the resulting reads fail at the block layer (sb_bread()
returns NULL via grow_buffers()'s check_mul_overflow() guard), so
today this manifests as mount failing in odd places rather than as
something more dangerous, but the validation step is still wrong
and there is no reason for callers to rely on the block layer to
catch a value that should never have been accepted in the first
place.
Use check_mul_overflow() to compute the two sector positions and
fail the mount if either multiplication wraps; this preserves the
existing semantics (mlcn * sct_per_clst >= sectors) instead of
switching to division (mlcn >= sectors / sct_per_clst), which
would tighten the check at edge cases where 'sectors' is not a
multiple of sct_per_clst. The check_*_overflow() style is the
one ntfs3 already uses for similar on-disk arithmetic in
fs/ntfs3/run.c. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: round bitmap stripes with sector division
raid5_bitmap_sector_map() aligns the array range to full RAID5 stripe
widths before converting it to component sectors. That width is
chunk_sectors multiplied by the number of data disks, and it is not
always a power of two.
Reproduce with a 4-disk RAID5, 1024-sector chunks, and three data disks.
The full-stripe width is 3072 sectors. For a one-sector write at array
sector 3072, correct rounding gives array range [3072, 6144), which maps
to component range [1024, 2048). The old round_down()/round_up() logic
instead gives [1024, 4096), which maps to [0, 1024).
Use sector_div() based arithmetic so the rounded range is aligned to the
actual RAID5 stripe width.
The deterministic mapper test now reports the fixed component range as
[1024, 2048), while the old mask-based range was [0, 1024). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Fix overflow in update_tg_cfs_runnable()
A divide-by-zero crash is observed when running hackbench:
[14697.488452] CPU: 112 UID: 0 PID: 124791 Comm: hackbench Not tainted 7.1.0-rc2+
[14697.492627] RIP: 0010:propagate_entity_load_avg+0x35f/0x3e0
[14697.506799] <TASK>
[14697.507411] __dequeue_task+0x2b4/0xc70
[14697.508677] dequeue_task_fair+0x36/0x370
[14697.509047] dequeue_task+0x101/0x2f0
[14697.509426] __schedule+0x1b1/0x1a00
[14697.510868] anon_pipe_read+0x3da/0x450
[14697.511400] vfs_read+0x361/0x390
[14697.512053] __x64_sys_read+0x19/0x30
The divide-by-zero happens here:
if (scale_load_down(gcfs_rq->load.weight)) {
load_sum = div_u64(gcfs_rq->avg.load_sum,
scale_load_down(gcfs_rq->load.weight));
}
gcfs_rq->load.weight is an insane large value and is truncated
to the lower 32 bits by div_u64, which happen to be 0.
Using AI for investigation, the cause is a u32 overflow in
update_tg_cfs_runnable(), and flat pickup became a victim when using
tg_tasks():
u32 new_sum, divider;
...
new_sum = se->avg.runnable_avg * divider; <-- boom
The following sequence shows how this triggers the crash:
propagate_entity_load_avg()
update_tg_cfs_runnable() # u32 overflow corrupts runnable_sum
__update_load_avg_cfs_rq()
___update_load_avg() # computes insane runnable_avg
update_tg_load_avg() # propagates to tg->runnable_avg
update_cfs_group()
calc_concur_shares()
tg_tasks() # long-to-int truncation, negative nr
reweight_entity() # corrupted se->load.weight
update_load_add() # corrupted cfs_rq->load.weight
propagate_entity_load_avg()
update_tg_cfs_load()
div_u64() # divide-by-zero
Fix by widening new_sum from u32 to u64 (no need to force tg_tasks()
to return unsigned long after this fix) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: fix integer overflow in dec_msg buffer count check
If the supplied msg[2] (num_buffers) is 0x3FFFFFFF, the expression
6 + num_buffers * 4 wraps to 2 and the bounds check passes, letting
the parser loop far past the end of the message BO. Triggering it
additionally requires a ~4GiB mapping so that msg[1] survives the
earlier "header does not fit in BO" check.
Rewrite the test in division form, which is overflow-free by
construction. Also update the message to reflect that msg is invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
media: s2255: check firmware size before reading trailing marker
s2255_probe() reads a 4-byte marker and version from the last 8 bytes
of the firmware blob (fw->data[fw_size - 8] and [fw_size - 4]). If the
firmware file is shorter than 8 bytes, fw_size - 8 underflows and the
access reads out of bounds. Validate the firmware size before indexing. |
| libssh2 through 1.11.1, fixed in commit 7acf3df contains an out-of-bounds write vulnerability in ssh2_transport_read() that fails to enforce upper bounds on packet_length field. Remote attackers can send crafted SSH packets with excessively large packet_length values to corrupt heap memory and achieve remote code execution. |
| RestrictedPython is a tool that helps define a subset of the Python language for accepting program input in a trusted environment. Prior to 8.4, RestrictedPython could allow a sandbox escape when a custom import policy or globals exposed the standard library string module, the string.Formatter class, a Formatter instance, or a Formatter subclass to restricted code. The string.Formatter methods format, get_field, get_value, and vformat performed attribute and item traversal internally without passing through RestrictedPython's safer_getattr protections. Restricted code could use those live object references to reach function globals, builtins, file access, or code execution primitives, affecting confidentiality, integrity, and availability in the host environment. This issue is fixed in version 8.4. |
| Out-of-bounds read vulnerability in the graphics module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| Perl versions before 5.40.5-RC1, from 5.41.0 before 5.42.3-RC1, from 5.43.0 before 5.43.11 have a heap buffer overflow when compiling regular expressions with a repeated fixed string on 32-bit builds.
Perl_study_chunk in regcomp_study.c checked the size of the joined substring buffer in characters rather than bytes. For a quantified fixed substring with a large minimum count, the byte length mincount * l could overflow SSize_t, producing an undersized SvGROW allocation; the subsequent copy writes past the end of the buffer.
A caller that compiles an attacker-controlled regular expression on a 32-bit perl build triggers a heap buffer overflow at compile time. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Validate AIBV and AISB before pinning guest pages
The AIBV holds one bit per MSI-X vector for a given function. The size of
the bit vector is derived from the NOI and the AIBVO. If the size of the
AIBV exceeds a single page boundary, then reject the request as we cannot
safely pin the guest AIBV.
Similarly reject the request if the AISB address is not 8-byte aligned as
the architecture requires doubleword alignment for the summary bit address.
Since the AISBO can address up to 64 bits, the size of the AISB can only be
8 bytes for the function. This also ensures the AISB doesn't exceed a
single page boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: fix folio size overflow in io_vec_fill_bvec()
io_vec_fill_bvec() computes the folio size with a plain int 1:
unsigned long folio_size = 1 << imu->folio_shift;
imu->folio_shift is unsigned int and comes from folio_shift() of the
folio backing the registered buffer, so it can be 32 or more on a 64 bit
kernel. Shifting int 1 that far is undefined, and on x86 and arm64 the
count is taken modulo 32, so a shift of 34 yields 4 rather than 16G.
Every other folio_shift shift in this file already uses 1UL.
The result is that the segment estimate and the fill loop disagree.
io_estimate_bvec_size() sizes the bvec array with the real shift:
max_segs += (iov[i].iov_len >> shift) + 2;
so a 1M iovec on a 16G folio is charged 2 segments, while
io_vec_fill_bvec() then walks the same iovec in folio_size chunks of 4
bytes and writes res_bvec[bvec_idx] a quarter of a million times, past
the end of the array it was given. src_bvec is advanced once per
iteration as well, so imu->bvec is read past its end at the same time.
validate_fixed_range() only checks that the range is inside the
registered buffer and does not bound the segment count.
Reaching it needs a folio with a shift of at least 32, which means a
gigantic hugetlb page: 16G on arm64 with 64K pages, where
CONT_PMD_SHIFT is 34 and hugetlb_add_hstate(CONT_PMD_SHIFT - PAGE_SHIFT)
registers that size, and likewise on powerpc. x86_64 tops out at 1G, so
a shift of 30, which still fits in int and is unaffected.
Use 1UL, as the rest of the file does. |
| An heap overflow vulnerability in the WatchGuard Fireware OS iked process allows a remote unauthenticated attacker to execute arbitrary code by sending specially crafted network traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at
the 'out:' label, but only calls the matching get_cpu_var() after the
'i < 0' early-return check. When event->hw.idx is negative the
function jumps to 'out:' without having taken get_cpu_var(), and the
trailing put_cpu_var() then issues an unmatched preempt_enable(),
underflowing preempt_count.
On a CONFIG_PREEMPT=y kernel preempt_count would underflow and
eventually present as a 'scheduling while atomic' BUG.
Move put_cpu_var() to pair with get_cpu_var() so the percpu access is
correctly bracketed and the 'out:' label only handles perf_pmu_enable. |
| libvips is a fast image processing library with low memory needs. Prior to version 8.18.3, libvips built without libtiff support but with ImageMagick support can overflow the combined frame height while loading a crafted multi-page TIFF through VipsForeignLoadMagick. The vulnerable calculations in libvips/foreign/magick6load.c and libvips/foreign/magick7load.c multiply the per-page Ysize by n_frames without a checked bound, which can cause a heap buffer over-read and process crash. Most package-manager builds include libtiff and do not use this affected fallback path. This issue is fixed in version 8.18.3. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post()
qrtr_endpoint_post() validates an incoming packet with
if (!size || len != ALIGN(size, 4) + hdrlen)
goto err;
where size comes from the wire. On 32-bit, size_t is 32 bits and
ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check
passes and skb_put_data(skb, data + hdrlen, size) writes past the
hdrlen-sized skb and oopses the kernel. 64-bit is unaffected.
This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB
Read in qrtr_endpoint_post"), which fixed only the 64-bit case.
Reject any size that cannot fit the buffer before the ALIGN. |
