| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns geneve->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in geneve->net can rewrite a geneve
device whose underlay lives in geneve->net.
geneve_changelink() applies the new configuration against geneve->net:
geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair
reopen the underlay sockets in that netns (geneve_sock_add() uses
geneve->net), so the same reasoning as the tunnel changelink series
applies here.
Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
memfd: deny writeable mappings when implying SEAL_WRITE
When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the
implied seal is set after the check that makes sure the memfd can not have
any writable mappings. This means one can use SEAL_EXEC to apply
SEAL_WRITE while having writeable mappings.
This breaks the contract that SEAL_WRITE provides and can be used by an
attacker to pass a memfd that appears to be write sealed but can still be
modified arbitrarily.
Fix this by adding the implied seals before the call for
mapping_deny_writable() is done. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2
(which traps) or ZCR_EL1 (which does not trap). KVM handles both in
different way:
- on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own
VL limit. This has the potential to break existing SW that relies
on the full LEN field to be stateful.
- on ZCR_EL1 access, we do absolutely nothing.
On restoring the SVE context for an L2 guest, we directly restore the
guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the
guest's view of the register was updated using the ZCR_EL2 accessor,
the value has already been sanitised (with the caveat mentioned above).
But if the guest used ZCR_EL1, the raw value is written into the HW,
and the L2 guest can now access VLs that it shouldn't.
Fix all the above by moving the VL capping to the restore points,
ensuring that:
- the HW is always programmed with a capped value, irrespective of
the accessor being used,
- the ZCR_EL2.LEN field is always completely stateful, irrespective
of the accessor being used.
Additionally, move ZCR_EL2 to be a sanitised register, ensuring that
only the LEN field is actually stateful. This requires some creative
construction of the RES0 mask, as the sysreg generation script does
not yet generate RAZ/WI fields.
[maz: rewrote commit message, tidy up access_zcr_el2()] |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the tunnel link netns t->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in
net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is
skipped when the link netns is dev_net(dev), where the rtnl path already
checked it. The other patches in this series use the same helper.
Gate ipgre_changelink() and erspan_changelink() with it, at the top of
the op before any attribute is parsed, because the parsers update live
tunnel fields first. ipgre_netlink_parms() sets t->collect_md before
ip_tunnel_changelink() runs.
Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in
vti6_siocdevprivate().") added the same check on the ioctl path. This
adds it on RTM_NEWLINK. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: require CAP_NET_ADMIN in target netns for unattached ioctls
/dev/ppp open is currently authorized against file->f_cred->user_ns,
while unattached administrative ioctls operate on current->nsproxy->net_ns.
As a result, a local unprivileged user can create a new user namespace
with CLONE_NEWUSER, gain CAP_NET_ADMIN only in that new user namespace,
and still issue PPPIOCNEWUNIT, PPPIOCATTACH, or PPPIOCATTCHAN against
an inherited network namespace.
Require CAP_NET_ADMIN in the user namespace that owns the target network
namespace before handling unattached PPP administrative ioctls.
This preserves normal pppd operation in the network namespace it is
actually privileged in, while rejecting the userns-only inherited-netns
case. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: restrict usage in unprivileged domU
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
---
V2:
- defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich)
- wait in open() if target domain isn't known yet
- issue message in case no target domain found (Jan Beulich) |
| Incorrect Privilege Assignment vulnerability in Brainstorm Force OttoKit suretriggers allows Privilege Escalation.This issue affects OttoKit: from n/a through 1.1.40. |
| A vulnerability was detected in donetick up to 0.1.82. The impacted element is the function CanDeleteHistory of the file internal/chore/model/model.go of the component History Deletion Handler. The manipulation of the argument AssignedTo results in improper authorization. The attack can be launched remotely. The exploit is now public and may be used. The project maintainer explains: "The concerns about "IDOR" framing seem to be overstated in my opinion (...), as Circle members are already trusted collaborators. We will address this issue. However, since the impact is limited to trusted members within the same circle, I would classify this as a bug rather than a security vulnerability." |
| A weakness has been identified in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. This impacts an unknown function of the file App/Home/Controller/UserController.class.php of the component Captcha Validation. Executing a manipulation can lead to improper access controls. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| Incorrect Privilege Assignment vulnerability in WPDeveloper Essential Addons for Elementor essential-addons-for-elementor-lite allows Privilege Escalation.This issue affects Essential Addons for Elementor: from n/a through 6.8.5. |
| Arcane is an interface for managing Docker containers, images, networks, and volumes. Prior to 2.6.0, UpdateUser in backend/api/handlers/users.go sets PasswordHash for any target without comparing caller and target privilege. A holder of delegated users:update permission can submit a password change for the global administrator, replace the administrator password, and authenticate as that account, resulting in complete global administrator account takeover. This issue is fixed in version 2.6.0. |
| An Incorrect Privilege Assignment vulnerability in Docker Hub's account-to-organization conversion feature allowed an authenticated attacker to reassign a personal access token (PAT) they controlled to another Docker Hub user without rotating or revoking the token secret. The unchanged PAT then authenticated to the registry as the recipient and could pull, push, or delete images, within its scopes, in repositories accessible to that user, including organization repositories. |
| A flaw was found in the maas-api and maas-controller ServiceAccounts within Red Hat OpenShift AI. These ServiceAccounts are granted cluster-wide permissions that exceed their operational requirements. An attacker who compromises the identity of these ServiceAccounts, either through a remote code execution vulnerability or by creating a malicious pod in the same namespace, could exploit these excessive permissions. This could lead to full cluster administrator privileges through the creation of new ClusterRoleBindings or the disclosure of sensitive information by accessing all secrets across the cluster. |
| A flaw was found in Data Science Pipelines (DSP). An attacker with namespace editor privileges can bypass security hardening by submitting a malicious Argo Workflow through the V1 API path. This allows the API server to create pods with elevated privileges, acting as a 'confused deputy' on behalf of the attacker. Successful exploitation grants the attacker node-root access, enabling arbitrary code execution and full control over the underlying node. |
| The Ignition Perspective module does not properly validate session privileges when determining Designer-level access. An authenticated user with access to a Vision project could provide their valid Vision session identifier and gain Designer-level privileges. An attacker could exploit these elevated privileges to execute arbitrary code in the context of the Ignition Gateway process. |
| Gitea's collaboration access-mode endpoint accepts the Owner access mode from an authenticated repository collaborator with Admin access. The collaborator can promote their effective permissions from Admin to Owner and then perform owner-only operations, including transferring the repository to their own account. This bypasses the intended boundary between repository administration and ownership. |
| Gitea allows a token with write:user scope to register an attacker-controlled SSH public key on the token owner's account. API requests signed with the corresponding private key authenticate as that account through HTTP Signature without API token scope information, causing route-level token scope checks to be skipped. This converts a user-scoped token into an unscoped API authentication method while retaining the account's normal role and repository permissions. |
| Gitea's repository-side team-link API allows a repository administrator who is not an organization owner to attach organization teams to a repository despite RepoAdminChangeTeamAccess being disabled. The endpoint does not enforce the organization's restriction on repository administrators changing team access. This allows unauthorized changes to which organization teams receive repository access. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: gate nfs2 setacl by argp->mask
The NFSACL v2 SETACL path shares the decoder convention used by its
v3 sibling: nfsaclsvc_decode_setaclargs() fills in argp->acl_access
only when NFS_ACL is set in the request mask and argp->acl_default
only when NFS_DFACL is set, leaving the other pointer NULL because
the argument buffer is zeroed up to pc_argzero before decode.
nfsacld_proc_setacl() then hands both pointers to set_posix_acl()
unconditionally. set_posix_acl(idmap, dentry, type, NULL) is the VFS
"remove this ACL type" operation, so an omitted arm is
indistinguishable from an explicit request to delete that ACL. A
SETACL carrying only NFS_ACL silently strips the directory's default
ACL; mask=0 strips both.
This is the same defect just fixed in nfsd3_proc_setacl(); apply the
same remedy. Gate each set_posix_acl() call on its mask bit and
initialize error to 0 so that a request with neither bit set leaves
the on-disk ACLs untouched and returns success. The out_drop_lock
path and the unconditional posix_acl_release() in
nfsaclsvc_release_setacl() already tolerate the skipped arms. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: require net admin for TIPCv2 netlink mutators
TIPCv2 registers mutating generic-netlink operations without admin
permission flags. Generic netlink only checks CAP_NET_ADMIN when an
operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local
unprivileged process can currently change TIPC state through commands
such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and
bearer enable/disable.
The legacy TIPC netlink API already checks netlink_net_capable(...,
CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators
the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which
maps to the same namespace-aware CAP_NET_ADMIN check that
netlink_net_capable() performs, so the behaviour matches the legacy
path and keeps working for CAP_NET_ADMIN holders in a non-initial user
namespace (containers).
A QEMU/KASAN repro run as uid/gid 65534 with zero effective
capabilities previously succeeded in changing the network id and node
identity, setting and flushing key material, and enabling/disabling a
UDP bearer. With this patch applied the same operations fail with
-EPERM. |
