| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper handling of undefined values vulnerability in upKeeper Solutions upKeeper Instant Privilege Access allows Privilege Escalation.
This issue affects upKeeper Instant Privilege Access: through 1.7.1. |
| In JetBrains Datalore before 2026.2.1 unauthenticated path traversal via the report blob endpoint allowed reading arbitrary files |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: clear stale link state on full reset
After a full chip reset, mac80211 reconfig replays interface, link and
channel context setup. mt7996_vif_link_add() short-circuits when the
link_id is still marked in mvif->valid_links, a state introduced for
postponing link teardown to interface removal. The reset path frees the
link structures without clearing those bits, so the replayed setup never
re-creates dev_info/bss_info/STA records in the restarted firmware and
never re-registers the link wcid, leaving the device inoperative.
The reset path also leaks every allocated MLD index: per-link indices
and the per-vif group/remap indices are re-allocated from scratch during
reconfig, but the old bits stay set in the masks, so repeated full
resets exhaust the index space.
Clear valid_links in the reset vif iterator and reset the MLD index
masks alongside the existing omac_mask clearing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard. |
| Cloud Commander (cloudcmd) versions 19.20.2 through 19.21.1 contains a path traversal vulnerability in the GET /api/v1/pack endpoint where the onGET handler at server/rest/index.js:130 calls the unguarded root() function instead of the root.resolve() validation wrapper used elsewhere. Attackers can send percent-encoded directory traversal sequences in the pack request path to read arbitrary files outside the configured --root directory, such as /etc/passwd or SSH private keys, which are archived and streamed back as a downloadable tar.gz file. |
| In sftp in OpenSSH before 10.6, a server can trigger directory traversal (causing files to be written to unintended locations) during a recursive copy operation. |
| Path traversal of 'trusted_jar_paths' in Impala 4.5.2 allows an attacker-controlled JAR to be loaded via a relative path where the prefix matches a path specified in 'trusted_jar_paths'.
The startup flag 'trusted_jar_paths' references URIs for loading files from local or remote filesystems. Path traversal can't override the schema, but can result in loading a JAR that has been uploaded to a different location in that filesystem via Impala DDLs such as CREATE DATA SOURCE and CREATE TABLE. Path traversal can only be used if a trusted path exists, so this attack requires 'trusted_jar_paths' have a non-empty value configured by the Impala admin.
Users are recommended to upgrade to version 4.5.3, which fixes this issue. |
| Satel Netco Design versions prior to v2.1.7 contains a relative path traversal vulnerability in its data import functionality. An authenticated user with Viewer privileges could access file paths outside the intended directory and use observable application responses to determine whether files exist on the host system. |
| Satel Netco Design versions prior to v2.1.7 contains a relative path traversal vulnerability in its data export functionality. An authenticated user with Viewer privileges could write attacker influenced content to file system locations accessible to the application service. Successful exploitation could result in unauthorized file creation or modification and, under certain conditions, arbitrary code execution. |
| A vulnerability in the Cisco Smart Licensing Utility API of Cisco License On-Prem, formerly Cisco Smart Software Manager On-Prem (SSM On-Prem), could allow an unauthenticated, remote attacker to write arbitrary files to the system or cause a DoS condition on an affected application.
This vulnerability is due to improper input validation and a lack of authentication in the management API. An attacker could exploit this vulnerability by sending a crafted request to the affected API. A successful exploit could allow the attacker to modify system files or cause a DoS condition. |
| A path traversal flaw was found in SSSD's AD GPO provider. The ad_gpo_extract_smb_components() function does not sanitize .. sequences in the gPCFileSysPath LDAP attribute, allowing an attacker with AD GPO management access to write files outside the GPO cache directory as root. On default RHEL configurations with SELinux enforcing, this can be used to inject Kerberos configuration leading to authentication bypass. |
| Ollama is vulnerable to path traversal in the `/api/pull` endpoint due to insufficient validation of layer digests by the `digestToPath` function. An unauthenticated remote attacker can specify a path traversal sequence as a layer digest, causing a malicious binary to be written outside the model store.
Critically if the server process has write access to `/usr/lib/ollama` (the default in most Ollama Docker images), an attacker can write the malicious file to that directory. On the next server restart, the file is loaded and executed, resulting in remote code execution as root.
This issue was fixed in version 0.35.0. |
| A path traversal vulnerability in the Fireware OS WebUI management agent allows an authenticated administrator to read or list arbitrary files on the local filesystem by sending a specially crafted management request. |
| A remote attacker can trigger a denial of service in the socket.remoteAddress variable, by sending a crafted HTTP request. Usage of the undefined variable raises a TypeError exception.
|
| A user who can supply bundle content to a repository referenced by a GitRepo resource, for example through Git push access, or through permission to create or modify a GitRepo, can cause SUSE Rancher Fleet to read files from the filesystem of the environment that processes the bundle and include their contents in the generated Bundle resource. This can expose configuration or credential material that the user has no Kubernetes RBAC permission to read, including Helm registry credentials made available to the bundle-processing job when per-path Helm credentials are configured.
This affects Fleet 0.16 before 0.16.2, 0.15 before 0.15.7, 0.14 before 0.14.11, 0.13 before 0.13.16, 0.12 before 0.12.20 and potentially older unsupported versions. |
| In Qt for MCUs, a Text element that displays styled text halts the device if an <img> tag in the text contains an attribute with an empty value. The text parser passes the empty value to an internal check that only accepts non-empty values. The check fails and reports an error, and the default error handler halts the device. |
| Ghost versions 5.8.0 before 6.34.0 contain an input validation vulnerability in the admin iframe that allows attackers to take over staff user accounts. Attackers with content publishing privileges can craft malicious pages that, when visited by active staff users, enable account takeover through improper input validation. |
| A path traversal vulnerability (CWE-22) in the embedded VMDK filesystem extractor in Google OSV-SCALIBR versions 0.3.6 through 0.5.0 allows an attacker who controls the scan target to write arbitrary files to the host system. When scanning crafted VMDK images, insufficient validation of archive path entries allows file extractions to escape destination directories. |
| Cato Networks SDP Client for Windows before 6.12.6 allows a local user to delete arbitrary files with SYSTEM privileges via improper validation of a client-supplied SID over a local IPC named pipe. |
| A directory traversal vulnerability in the file upload functionality of Hitachi Energy RTU500 end-of-life versions allows an unauthenticated attacker to write or overwrite arbitrary files on the device file system. Depending on the files affected, successful exploitation could result in unauthorized modification of device data or disruption of the device’s intended operation. |
