| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix 22000 series SMEM parsing
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ioam6: fix OOB and missing lock
When trace->type.bit6 is set:
if (trace->type.bit6) {
...
queue = skb_get_tx_queue(dev, skb);
qdisc = rcu_dereference(queue->qdisc);
This code can lead to an out-of-bounds access of the dev->_tx[] array
when is_input is true. In such a case, the packet is on the RX path and
skb->queue_mapping contains the RX queue index of the ingress device. If
the ingress device has more RX queues than the egress device (dev) has
TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues.
Add a check to avoid this situation since skb_get_tx_queue() does not
clamp the index. This issue has also revealed that per queue visibility
cannot be accurate and will be replaced later as a new feature.
While at it, add missing lock around qdisc_qstats_qlen_backlog(). The
function __ioam6_fill_trace_data() is called from both softirq and
process contexts, hence the use of spin_lock_bh() here. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl()
smb_inherit_dacl() trusts the on-disk num_aces value from the parent
directory's DACL xattr and uses it to size a heap allocation:
aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...);
num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces)
without checking that it is consistent with the declared pdacl_size.
An authenticated client whose parent directory's security.NTACL is
tampered (e.g. via offline xattr corruption or a concurrent path that
bypasses parse_dacl()) can present num_aces = 65535 with minimal
actual ACE data. This causes a ~8 MB allocation (not kzalloc, so
uninitialized) that the subsequent loop only partially populates, and
may also overflow the three-way size_t multiply on 32-bit kernels.
Additionally, the ACE walk loop uses the weaker
offsetof(struct smb_ace, access_req) minimum size check rather than
the minimum valid on-wire ACE size, and does not reject ACEs whose
declared size is below the minimum.
Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path.
A legitimate mount.cifs client creates a parent directory over SMB
(ksmbd writes a valid security.NTACL xattr), then the NTACL blob on
the backing filesystem is rewritten to set num_aces = 0xFFFF while
keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s
hash check still passes. A subsequent SMB2 CREATE of a child under
that parent drives smb2_open() into smb_inherit_dacl() (share has
"vfs objects = acl_xattr" set), which fails the page allocator:
WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0
Workqueue: ksmbd-io handle_ksmbd_work
__alloc_frozen_pages_noprof+0x46c/0x9c0
___kmalloc_large_node+0x68/0x130
__kmalloc_large_node_noprof+0x24/0x70
__kmalloc_noprof+0x4c9/0x690
smb_inherit_dacl+0x394/0x2430
smb2_open+0x595d/0xabe0
handle_ksmbd_work+0x3d3/0x1140
With the patch applied the added guard rejects the tampered value
with -EINVAL before any large allocation runs, smb2_open() falls back
to smb2_create_sd_buffer(), and the child is created with a default
SD. No warning, no splat.
Fix by:
1. Validating num_aces against pdacl_size using the same formula
applied in parse_dacl().
2. Replacing the raw kmalloc(sizeof * num_aces * 2) with
kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe
allocation.
3. Tightening the per-ACE loop guard to require the minimum valid
ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and
rejecting under-sized ACEs, matching the hardening in
smb_check_perm_dacl() and parse_dacl().
v1 -> v2:
- Replace the synthetic test-module splat in the changelog with a
real-path UML + KASAN reproduction driven through mount.cifs and
SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name
in v1 since it does not exist in ksmbd.
- Drop the commit-hash citation from the code comment per Namjae's
review; keep the parse_dacl() pointer. |
| Mounting an attacker-controlled FAT image with fault tolerance enabled causes an out-of-bounds heap write during log replay. The write is attacker-positioned and attacker-valued, and on a common embedded memory layout it reaches the FX_MEDIA driver callback, giving control of the instruction pointer. |
| A HID report descriptor is a sequence of items, each declaring in its header how many data bytes follow. The USBX host walks that sequence by advancing over each header and parsing the data behind it.
The walk checked that an item fitted in the descriptor only **after** it had advanced past the header and parsed the payload, and the item analysis it relied on never measured the declared sizes against the bytes actually received. A HID peripheral returning a short report descriptor therefore drove a heap out-of-bounds read during ordinary enumeration. |
| The Module Manager's object lookup validated one byte of a memory-protected module's search name and then walked as much of it as the module declared, in privileged mode, with the kernel's preemption count raised. Both lookup dispatchers are affected: the recommended `txm_module_object_pointer_get_extended` is handed a length and does not use it to bound the buffer, and the deprecated `txm_module_object_pointer_get` supplies the largest value a `UINT` can hold, so it removes the bound rather than lacking one.
A module can make the walk unbounded without knowing anything about the memory it reaches, and where the walk reaches memory a privileged read cannot take, the resulting fault leaves the kernel unable to preempt for the rest of the system's life.
Vulnerable functions: `_txm_module_manager_txm_module_object_pointer_get_dispatch`, `_txm_module_manager_txm_module_object_pointer_get_extended_dispatch` (both in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`) and `_txm_module_manager_object_name_compare` (`common_modules/module_manager/src/txm_module_manager_util.c`). |
| When writing a long cookie name and value to a Netscape cookie jar, a remote
HTTP server can make `curl` write a record that exceeds its line-length
parsing limit. Consequently, any subsequent `curl` invocation reading from
that same cookie jar using `--cookie` silently aborts parsing prematurely upon
encountering the too long line, ignoring all subsequent valid cookies in the
file. |
| fast-uri is a dependency-free RFC 3986 URI parser and serializer for Node.js. In versions before 2.4.8, from 3.0.0 through 3.1.8, and from 4.0.0 through 4.2.2, fast-uri percent-decodes the scheme component with the legacy global unescape() function before validating it, so an input whose decoded scheme is a dangerous token is emitted as a live scheme even though RFC 3986 does not allow percent-encoding in a scheme and no other parser accepts it. An application that screens dangerous schemes on the raw input and then stores or renders the normalized or resolved result can turn an inert string into an executable javascript, data, or vbscript URL, producing a stored or reflected cross-site scripting vector, and the equal() comparison treats an encoded and a plain scheme as the same, which can bypass equality-based allowlists. The issue is fixed in fast-uri 2.4.8, 3.1.9, and 4.2.3, and users should upgrade to one of these versions or later. As a workaround, reject input whose scheme part contains a percent sign, or check the parsed scheme against an allowlist after normalization and use that same parsed result rather than the raw string. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: DQO: reject TSO packets with an out of range MSS
gve_prep_tso() notes that the device requires the MSS to be <= 9728,
but does not enforce it, assuming the 9K MTU enforced by the hypervisor
and the 64KB limit on TSO sizes are enough.
This does not hold for packets that were not generated locally.
A guest behind a tap, or any packet socket user, can provide an
arbitrary gso_size in virtio_net_hdr. Layer 2 forwarding does not check
the MTU for GSO packets (is_skb_forwardable()), and gso_features_check()
only bounds skb->len and gso_segs, never gso_size.
Such a packet reaches gve_tx_fill_tso_ctx_desc(), which puts gso_size
into the mss field of the TSO context descriptor. This field is 14 bits
wide, so a gso_size of 16384 is silently turned into an MSS of zero.
Drop these packets from gve_prep_tso(), and make sure that
gve_features_check_dqo() leaves their GSO bits alone: skb_segment()
splits at gso_size regardless of the MTU, so falling back to software
segmentation would give the device non TSO packets bigger than the
9728 bytes it supports.
Note that the device can still be given oversized non TSO packets when
the stack segments in software for other reasons, for instance after
TSO has been disabled with ethtool. This is a generic issue, because
the MTU check is skipped for GSO packets in the forwarding path, and
is addressed separately. |
| fast-uri is a dependency-free RFC 3986 URI parser and serializer for Node.js. In versions from 2.4.2 through 2.4.7, from 3.1.3 through 3.1.8, and from 4.0.1 through 4.2.2, for HTTP-family schemes the canonicalizeHost() function passes the parsed host to the WHATWG URL parser and adopts its hostname without checking that the parser consumed the entire input as a host, so the authority can be silently rewritten: data before an at-sign is dropped and tab, carriage-return, and line-feed characters are stripped, with no error reported. An application that enforces host-based policy such as denylists, loopback filtering, redirect validation, or outbound proxy routing on one representation can then see the canonical host diverge from what it checked, allowing traffic to be steered to an unintended destination. The issue is fixed in fast-uri 2.4.8, 3.1.9, and 4.2.3, and users should upgrade to one of these versions or later. As a workaround, reject an authority that contains more than one at-sign or any tab, carriage-return, or line-feed before calling fast-uri, or treat any non-empty parse error as fatal and compare hosts only from the same parse result. |
| The X.509 parser in NetX Secure accepts an RSA public key of any size, but every signature-verification path decrypts into fixed-size buffers dimensioned for the `NX_CRYPTO_MAX_RSA_MODULUS_SIZE` default of 4096 bits. A certificate carrying a larger modulus drives an out-of-bounds write past a file-scope static during ordinary certificate-chain verification.
It is reachable pre-authentication. The issuer used for the crypto operation is looked up in the remote, peer-supplied store before the trusted store, so the attacker supplies the oversized key themselves as an intermediate in the chain they present. It triggers on a TLS or DTLS client verifying a malicious server's chain, and on a server performing client-certificate authentication. |
| json-smart through 2.6.0 contains an input validation bypass vulnerability that allows attackers to evade strict-mode trailing-data checks by inserting a literal 0x1A character. Attackers can append 0x1A and malformed content to pass JSONValue.parseStrict or isValidJsonStrict validation, creating parser differentials with downstream parsers like Jackson or Gson. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Avoid rounding zero ring sizes
roundup_pow_of_two() is undefined for zero. ethtool permits a zero ring
size to reach the driver, where the minimum-size check should reject it.
Leave zero unchanged while rounding nonzero ring sizes. The minimum-size
check then rejects zero deterministically without changing the established
behavior for other values. |
| Improper validation of pod identifier uniqueness in aws-network-policy-agent in Amazon EKS Network Policy Agent before v1.4.0 might allow an authenticated remote user to bypass NetworkPolicy enforcement on co-located pods in other namespaces via crafted pod and namespace names that produce pod identifier collisions.
To remediate this issue, users should upgrade to Amazon EKS Network Policy Agent 1.4.0 or later and Amazon VPC CNI Managed Add-on v1.22.4 or later (which includes Network Policy Agent v1.4.0). |
| In MariaDB server version through 11.8.5, when server audit plugin is enabled with server_audit_events variable configured with QUERY_DCL, QUERY_DDL, or QUERY_DML filtering, if an authenticated database user invokes a SQL statement prefixed with double-hyphen (—) or hash (#) style comments, the statement is not logged. |
| Improper validation of the Destination Connection ID length in s2n-quic 1.88.0 and earlier may allow an unauthenticated remote user to cause a denial of service by shutting down a server endpoint via a single crafted UDP datagram. Only server endpoints specifically configured to send Retry packets are affected.
To remediate this issue, users should upgrade to version v1.89.0 or later. |
| Improper Validation of Specified Quantity in Input vulnerability in WP Desk Flexible Quantity – Measurement Price Calculator for WooCommerce flexible-quantity-measurement-price-calculator-for-woocommerce allows Input Data Manipulation.This issue affects Flexible Quantity – Measurement Price Calculator for WooCommerce: from n/a through 2.3.22. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v5.3.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 86ac011ae234c03fb872f4945913391ea1d8862e) |
| A flaw was found in SmallRye GraphQL. The number scalar coercion for BigInteger does not properly validate the magnitude of float or string inputs. An unauthenticated remote attacker can exploit this by sending a GraphQL query containing a large exponent float literal. This can lead to the allocation of extremely large BigInteger objects, causing CPU exhaustion or an OutOfMemoryError, resulting in a denial of service. |
