| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76491 are related to issues concerning reachable assertions that are grouped under the Common Weakness Enumeration (CWE) Base CWE-617. |
| A BIND resolver that is configured with both a "redirect" zone and "qname-minimization strict" may abort with an assertion failure while processing the redirect.
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| UNSUPPORTED WHEN ASSIGNED Improper restriction of XML external entity references in Apache Abdera allows an attacker to access sensitive data or make server-side requests when an application parses attacker-controlled XML with Abdera.
This issue affects Apache Abdera: all versions.
Apache Abdera is retired and no longer supported, so we do not plan to release a version that fixes this issue. Users are recommended to migrate to a maintained alternative. Applications that cannot migrate should ensure that untrusted XML cannot reach the affected Abdera parser or JDBC adapter parsing paths. Actively maintained downstream products may still be impacted if they include an affected Abdera artifact.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| MikroTik RouterOS through 7.24.5 contains a session token replay vulnerability in the WebFig interface that allows attackers to bypass authentication by replaying captured session tokens across new ECDH sessions. The makeSessionKey function in libucrypto.so generates tokens using fixed salts without incorporating channel-specific or session-specific input, and the user service validates tokens against the login store without verifying channel context, enabling stolen tokens to grant persistent administrative access until the token store is explicitly cleared. This vulnerability extends the impact of CVE-2025-61481, which identified the underlying transport-layer exposure without a corresponding fix. |
| Django REST framework is a toolkit for building Web APIs. From 3.12.0 until 3.18.2, TokenProxy.delete() in rest_framework/authtoken/models.py uses the proxy's user-id pk while the concrete Token token-string primary key identifies rows, so Django issues a deletion query that matches no row and reports zero deletions without raising an error. Applications, administrative integrations, or operational scripts that revoke credentials through a TokenProxy instance can therefore believe revocation succeeded while the token remains live and continues authenticating. DRF's own TokenAdmin.delete_model workaround is not affected, but other callers can leave access available indefinitely because DRF tokens do not expire automatically. This issue is fixed in version 3.18.2. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JAXP). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| OpenRemote is an open-source internet-of-things platform. Prior to 1.24.2, the KNXProtocol.startAssetImport method in agent/src/main/java/org/openremote/agent/protocol/knx/KNXProtocol.java processes 0.xml from an authenticated user's uploaded ETS project ZIP with Saxon TransformerFactoryImpl and XMLInputFactory parsers that permit external entity resolution. This incomplete remediation of CVE-2026-40882 leaves the KNX handler unprotected while the parallel Velbus handler is hardened, allowing a regular realm user to read files accessible to the JVM process or cause server-side requests. This issue is fixed in version 1.24.2. |
| The system fails to invalidate existing access tokens associated with sub-organization users during sensitive account management operations such as password reset, role change, or sub-organization disablement. This oversight allows previously issued tokens to remain active even after the user's access context has been modified or revoked through administrative actions.
The identified issue could lead to unauthorized access by a malicious actor, but only when all of the following conditions are met: previously issued access tokens remain active, and these tokens have been exposed to malicious actors. |
| Reachable exit in NTPsec ntpd 1.1.4 through 1.2.5 allows a remote attacker to terminate the daemon via an NTS request with excess NTS Cookie Placeholder extension fields. |
| A recursive BIND server that receives a query with recursion desired (RD=1) followed by a non-recursive query (RD=0) may exit with an assertion failure, resulting in a denial of service. To be vulnerable, the BIND server must allow recursive queries and have at least two RPZ zones configured: one with the default setting of "recursive-only yes", and the other with "recursive-only no".
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
Take the following unprivileged program as an example:
r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */
...
14: r0 += r1 /* r1 is a bounded scalar */
15: r9 = r0
Loading it triggers a verifier warning from reg_bounds_sanity_check():
verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out
of sync with range bounds r64={.base=0x0, .size=0x0}
r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0)
What happens:
1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new
offset is computed into dst_reg's var_off and 32/64-bit ranges.
2. Because pointer registers do not track 32-bit subregister bounds,
__mark_reg32_unbounded() first sets r32 to the full range; r32 is
re-derived from the offset at the end of the function by
reg_bounds_sync().
3. On the unprivileged path, sanitize_ptr_alu() is called and, via
sanitize_speculative_path() -> push_stack(), snapshots the current
register state and schedules the next instruction (insn 15) to be
verified directly as a speculative path.
4. That snapshot is taken between step 2 and the final reg_bounds_sync():
at this point dst_reg's var_off still holds the (const) original
offset while r32 has just been blanked to the full range, i.e. the two
are out of sync. When the speculative path later verifies insn 15
(r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and
trips the warning.
var_off and the 32-bit range must always be consistent. There are two
ways to keep the snapshot consistent:
1. sync var_off and r32 before the snapshot so they match, or
2. leave r32 at its original (already consistent) value and blank it
only after the snapshot.
The whole point of sanitize_ptr_alu() is to insert a harmless masking
sequence that keeps the access in bounds under speculation, so the state
it snapshots should faithfully represent that. Take approach 2: move
__mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative
snapshot keeps the pointer's original, consistent r32. The non-speculative
path is unchanged: r32 is still blanked before the offset is applied and
re-derived by reg_bounds_sync(). |
| The Apache Airflow Keycloak auth manager did not end the session on logout: the logout route revoked the presented token, but `KeycloakJWTMiddleware` then issued a new, unrevoked token on the same response, so the user stayed logged in. Deployments using the Keycloak auth manager are affected: after a user logs out, anyone with later access to the same browser (for example on a shared workstation) can continue to act as that user.
Users of apache-airflow-providers-keycloak are recommended to upgrade to apache-airflow-providers-keycloak 0.11.1 or later. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JAXP). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JDBC). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| @fastify/jwt is a JWT utility plugin for Fastify. In versions prior to 10.2.5, the top-level sign and verify methods replace the globally configured defaults with the per-call options instead of merging them, so passing any per-call option silently drops every global default that the call does not restate, including temporal protections such as token expiration and maximum accepted token age. A token signed this way carries no expiration claim and never expires, and verification stops enforcing a configured maximum age, so stale or never-expiring tokens are accepted. The route-level decorators for signing and verifying already merge options and are not affected. The issue is fixed in @fastify/jwt 10.2.5, and users should upgrade to 10.2.5 or later. |
| VOCALOID6 Editor provided by Yamaha Corporation improperly restricts XML external entity references. Loading a specially crafted project file may the product to initiate unintended communication, potentially leading to the leak of sensitive information from the device where the product is installed or resulting in a denial-of-service (DoS) condition. |
| @fastify/oauth2 is a Fastify wrapper for OAuth2 login flows. In versions 7.2.0 through 8.3.1, the state and code-verifier cookies are set without a Path attribute at a login route with two or more path segments, while the clearing step at the OAuth callback writes them with a root path, so the original cookies survive the callback and the documented single-use guarantee for the state value does not hold. A state value an attacker learns stays valid for the rest of the browser session, letting the attacker drive their own authorization flow in the victim's browser and sign the victim in to the attacker's account (login CSRF). The issue is fixed in @fastify/oauth2 8.3.2, and users should upgrade to 8.3.2 or later. As a workaround, set an explicit cookie path so the set and the clear name the same cookie. |
| Netskope is notified about a potential gap in its agent (NSClient) where a system with Netskope Client while connecting to an access point with Captive Portal switches to a Network which already has internet connectivity, the Captive Portal does not close. This allows the possibility of abuse via the Captive Portal using a rogue access point to either access malicious sites or exfiltrate data.The issue impacts all versions prior to R142 |
| IBM Cyber Fraud 1.0.0 through 1.0.2 has a missing secure attribute allowing sensitive cookies to be transmitted over unencrypted connections, potentially enabling an attacker to intercept session data through network-based attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: handle empty FILS association request payload
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and the S2V result is then the
complete output, so handle this case before the CTR step, which has
nothing to encrypt. |
